Onkyo SC886 Instruction Manual - Page 51
Notes, Hdmi1, Hdmi2, Hdmi3, Hdmi4
UPC - 751398008405
View all Onkyo SC886 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
First Time Setup-Continued 2 Use the Up and Down [R]/[X] but- tons to select "1. Input/Output Assign", and then press [ENTER]. The "Input/Output Assign" menu appears. 1. Input/Output Assign 1. Monitor Out 2. HDMI Input 3. Component Video Input 4. Digital Audio Input 5. Analog Audio Input 3 Use the Up and Down [R]/[X] but- tons to select "2. HDMI Input", and then press [ENTER]. The "HDMI Input" menu appears. 1-2. HDMI Input DVD - - - VCR/DVR - - - CBL/SAT - - - GAME/TV - - - AUX1 - - - AUX2 - - - Notes: • For composite video, S-Video, and component video upconversion for the HDMI OUT MAIN or HDMI OUT SUB, the "Monitor Out" setting must be set to "HDMI Main" or "HDMI Sub", respectively (see page 49), and the "HDMI Input" setting must be set to "- - -". See page 29 for more information on video signal flow and upconversion. • When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automatically set to the same HDMI IN. See "Digital Audio Input Setup" on page 53. • The "TUNER" input selector cannot be assigned and is fixed at the "- - -" option. • This procedure can also be performed on the AV controller by using its [SETUP] button, arrow buttons, and [ENTER] button. MOVE VALUE RETURN RETURN SETUP EXIT 4 Use the Up and Down [R]/[X] but- tons to select an input selector, and use the Left and Right [F]/[S] buttons to select: HDMI1, HDMI2, HDMI3, HDMI4: Select the HDMI IN to which the video component has been con- nected. - - -: Output composite video, S-Video, and component video sources from the HDMI OUT. The video output signal from the HDMI OUT is the one configured in "Component Video Setup" (see page 52). Each HDMI IN cannot be assigned to more than one input selector. When HDMI1 - HDMI4 have already been assigned, you must set first any unused input selectors to "- - -" or you will be unable to assign HDMI1 - HDMI4 to input selector. 5 Press the [SETUP] button. Setup closes. 51