Onkyo SC886 Instruction Manual - Page 75

Using the Listening Modes Selecting the Listening Modes For a description of each listening mode, see "About the Listening Modes" on page 82. Selecting with the Remote Controller • The Dolby Digital and DTS listening modes can only be selected if your DVD player is connected to the AV controller with a digital audio connection (coaxial, optical, or HDMI). • The listening modes you can select depends on the format of the input signal. To check the format, see "Displaying Source Information" on page 66. • While a pair of headphones is connected, you can only select the Pure Audio, Mono, Direct, or Stereo listening mode. Selecting on the AV Controller STEREO THX PURE AUDIO LISTENING MODE ■ [PURE AUDIO] button This button selects the Pure Audio listening mode. When this mode is selected, the AV controller's display is turned off and only video signals input through HDMI IN can be output. Pressing this button again will select the previous listening mode. ■ [STEREO] button This button selects the Stereo listening mode. ■ [THX] button This button selects the THX listening modes. ■ LISTENING MODE [F]/[S] buttons Pressing these buttons repeatedly cycles through all of the listening modes that can be used with the current input source. SURR STEREO PURE A DIRECT , ALL ST THX ■ [STEREO] button This button selects the Stereo listening mode. ■ [SURR] button This button selects the Dolby Digital and DTS listening modes. ■ LISTENING MODE [F]/[S] buttons Pressing these buttons repeatedly cycles through all of the listening modes that can be used with the current input source. ■ [PURE A] button This button selects the Pure Audio listening mode. When this mode is selected, the AV controller's display is turned off and only video signals input through HDMI IN can be output. ■ [DIRECT] button This button selects the Direct listening mode. ■ [THX] button This button selects the THX listening modes. ■ [ALL ST] button This button selects the All Channel Stereo listening mode. 75