Onkyo TX-NR808 Owner Manual - Page 23
Audio Connection Formats, Use this setting if you connect the AV receiver's, to your TV., Resolution - hdmi pass through
View all Onkyo TX-NR808 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Note • The "Monitor Out" setting will be automatically switched to "Analog" (➔ 42) if not connected to both outputs when "Both" is selected or if not connected to a priority output when "Both(Main)" or "Both(Sub)" is selected. ■ "Monitor Out" setting set to "Analog" Video input signals flow through the AV receiver as shown, with composite video, S-Video and PC IN (Analog RGB) sources being upconverted for the component video output. Use this setting if you connect the AV receiver's COMPONENT VIDEO MONITOR OUT to your TV. Composite video is upconverted to S-Video and S-Video is downconverted to composite video. Note that these conversions only apply to the MONITOR OUT V and S outputs, not the VCR/DVR OUT V and S outputs. The composite video, S-Video and component video outputs pass through their respective input signals as they are. This signal flow also applies when the "Resolution" setting is set to "Through" (➔ 43). Video Signal Flow Chart Blu-ray Disc/DVD player, etc. Composite S-Video PC IN Component HDMI (Analog RGB) IN AV receiver Composite MONITOR OUT S-Video Component HDMI *1 TV, projector, etc. *1 PC IN (Analog RGB) input signal is output at 720p resolution. Video Signal Flow and the Resolution Setting When the "Monitor Out" setting is set to "Analog" (➔ 42), Video Signal Flow Chart if the "Resolution" setting is set to anything other than "Through" (➔ 43), the video signal flow will be as shown Blu-ray Disc/DVD player, etc. here, with composite video and S-Video sources being upcon- verted for the component video output. Composite S-Video Component HDMI The composite video, S-Video, and component video outputs IN pass through their respective analog input signals as they are. HDMI input signals are not output. AV receiver Composite MONITOR OUT S-Video Component HDMI Audio Connection Formats TV, projector, etc. Audio component can be connected by using any of the following audio connection formats: analog, optical, coaxial, analog multichannel, or HDMI. When choosing a connection format, bear in mind that the AV receiver does not convert digital input signals for analog line outputs and vice versa. For example, audio signals connected to an optical or coaxial digital input are not output by the analog VCR/DVR OUT. If signals are present at more than one input, the inputs will be selected automatically in the following order of priority: HDMI, digital, analog. Audio Signal Flow Chart Blu-ray Disc/DVD player, etc. Analog Multichannel Optical Coaxial IN AV receiver *1 *1*3 *1 *1 *3 Analog OUT HDMI HDMI *1 *2 TV, projector, etc. *1 Depends on the "Audio TV Out" setting (➔ 56). *2 This setting is available, when "Audio Return Channel" setting is set to "Auto" (➔ 57), you must select the TV/CD input selector and your TV must support ARC function. *3 Only the front L/R channels are output. En 23