Onkyo TX-NR808 Owner Manual - Page 52

IntelliVolume, A/V Sync, Name Edit, ENTER, RETURN, TUNER, To correct a character

Page 52 highlights

IntelliVolume ■ IntelliVolume ` -12dB to 0dB to +12dB in 1 dB steps. With IntelliVolume, you can set the input level for each input selector individually. This is useful if one of your source components is louder or quieter than the others. Use F/S to set the level. If a component is noticeably louder than the others, use F to reduce its input level. If it's noticeably quieter, use S to increase its input level. A/V Sync ■ A/V Sync ` 0ms to 250ms in 5 ms steps. When using your DVD player's progressive scanning function, you may find that the picture and sound are out of sync. With the A/V Sync setting, you can correct this by applying a delay to the audio signal. To view the TV picture while setting the delay, press ENTER. To return to the previous screen, press RETURN. If HDMI Lip Sync is enabled (➔ 56) and your TV or display supports HDMI Lip Sync, the displayed delay time will be the summation of the A/V Sync delay time and the HDMI Lip Sync delay time. The HDMI Lip Sync delay time is displayed underneath in parentheses. Note • A/V Sync is disabled when the Pure Audio listening mode is selected, or when the Direct listening mode is used with an analog input source. • "A/V Sync" is not operable when the input selector is set to "NET/USB". Name Edit You can enter a custom name for each individual input selector (excluding TUNER) and radio preset for easy identification. When entered, the custom name will appear on the display. The custom name is edited using the character input screen. ■ Name 1 Use R/X/F/S to select a character, and then press ENTER. Repeat this step to enter up to 10 characters. 2 When you've finished, to store a name, be sure to use R/X/F/S to select "OK", and then press ENTER. Otherwise it will not be saved. Name input area 4-4. Name Edit Name BD/DVD abcde f gh i j k lm nopq r s t uvwxy z 1234567890- ` {}|: ? Shift Space Back Space OK +10 Shift CLR All Erase ABCDEFGH I JKLM NOPQRS T UVWX Y Z !@# $%^& ( )_ ~ [] ;',./ Shift Space Back Space OK +10 Shift CLR All Erase Shift*1: Switches the displayed character. (Left)/ (Right): Selected when the cursor is moved within the Name input area. Space: Enters a space character. Back Space*2: "Back Space" moves the cursor backward one character space. In addition, "Back Space" deletes the character to the left of the cursor. OK: Selects when the entry is complete. Tip *1 You can also be performed on the remote controller by using +10. *2 Press CLR on the remote controller, you can delete all characters in the input. To correct a character: 1 Use R/X/F/S to select " "(Left) or " "(Right), and then press ENTER. 2 Press ENTER several times to select the incorrect character (The cursor moves one letter each time ENTER is pressed). 3 Use R/X/F/S to select the correct character, and then press ENTER. Note • To name a radio preset, use TUNER to select AM or FM, and then select the preset (➔ 32). • (North American models) You cannot enter a custom name for SIRIUS radio presets. • "Name Edit" is not operable when the input selector is set to "NET/USB". To restore a custom name to the default, erase the custom name by entering an empty white space for each letter. En 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

52
En
IntelliVolume
IntelliVolume
–12dB
to
0dB
to
+12dB
in 1 dB steps.
With IntelliVolume, you can set the input level for each
input selector individually. This is useful if one of your
source components is louder or quieter than the others.
Use
e
/
r
to set the level.
If a component is noticeably louder than the others, use
e
to reduce its input level. If it’s noticeably quieter, use
r
to
increase its input level.
A/V Sync
A/V Sync
0ms
to
250ms
in 5 ms steps.
When using your DVD player’s progressive scanning
function, you may find that the picture and sound are out
of sync. With the A/V Sync setting, you can correct this
by applying a delay to the audio signal.
To view the TV picture while setting the delay, press
ENTER
.
To return to the previous screen, press
RETURN
.
If HDMI Lip Sync is enabled (
56
) and your TV or dis-
play supports HDMI Lip Sync, the displayed delay time
will be the summation of the A/V Sync delay time and the
HDMI Lip Sync delay time. The HDMI Lip Sync delay
time is displayed underneath in parentheses.
Note
A/V Sync is disabled when the Pure Audio listening mode is
selected, or when the Direct listening mode is used with an ana-
log input source.
•“
A/V Sync
” is not operable when the input selector is set to
NET/USB
”.
Name Edit
You can enter a custom name for each individual input
selector (excluding
TUNER
) and radio preset for easy
identification. When entered, the custom name will appear
on the display.
The custom name is edited using the character input
screen.
Name
To correct a character:
Note
To name a radio preset, use
TUNER
to select AM or FM, and
then select the preset (
32
).
(North American models)
You cannot enter a custom name for
SIRIUS radio presets.
•“
Name Edit
” is not operable when the input selector is set to
NET/USB
”.
To restore a custom name to the default, erase the custom
name by entering an empty white space for each letter.
1
Use
q
/
w
/
e
/
r
to select a character, and then
press
ENTER
.
Repeat this step to enter up to 10 characters.
2
When you’ve finished, to store a name, be sure
to use
q
/
w
/
e
/
r
to select “OK”, and then press
ENTER
. Otherwise it will not be saved.
1
Use
q
/
w
/
e
/
r
to select “
”(Left) or
”(Right), and then press
ENTER
.
2
Press
ENTER
several times to select the incor-
rect character (The cursor moves one letter
each time
ENTER
is pressed).
3
Use
q
/
w
/
e
/
r
to select the correct character,
and then press
ENTER
.
BD/DVD
Shift
All Erase
Shift
All Erase
4-4. Name
Edit
Name
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z
1
2
3
4
5
6
7
8
9
0
`
Space
Back Space
Shift
OK
{
}
|
:
<
>
?
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
;
,
.
/
[
]
Space
Back Space
Shift
OK
!
@
#
$
%
^
&
(
)
_
~
+10
CLR
+10
CLR
Name input area
Shift
*1
:
Switches the displayed character.
(Left)/
(Right):
Selected when the cursor is moved within the Name
input area.
Space
:
Enters a space character.
Back Space
*2
:
Back Space
” moves the cursor backward one char-
acter space. In addition, “
Back Space
” deletes the
character to the left of the cursor.
OK
:
Selects when the entry is complete.
Tip
*1
You can also be performed on the remote controller by
using
+10
.
*2
Press
CLR
on the remote controller, you can delete all
characters in the input.