Palm M130 Handbook - Page 85
To select a business card:, To beam a record, business card, or category of records:
UPC - 805931003812
View all Palm M130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Common tasks To select a business card: 1. Create an Address Book record that contains the information you want on your business card. 2. Tap the Menu icon . 3. Tap Record, and then tap Select Business Card. 4. Tap Yes. To beam a record, business card, or category of records: 1. Locate the record, business card, or category you want to beam. 2. Tap the Menu icon . 3. Tap Record, and then tap one of the following: The Beam command for an individual record In Address Book only: Beam Business Card Beam Category TIP You can also beam a business card by holding down the Address Book application button until the Beam Status dialog box appears. 4. When the Beam Status dialog box appears, point the IR port directly at the IR port of the receiving handheld. TIP For best results, handhelds should be between 10 centimeters (approximately 4 inches) and 1 meter (approximately 39 inches) apart, and the path between the two handhelds must be clear of obstacles. Beaming distance to other Palm OS handhelds may be different. 5. Wait for the Beam Status dialog box to indicate that the transfer is complete before you continue working on your handheld. To beam an application: 1. Open the Applications Launcher. 2. Tap the Menu icon . 3. Tap App, and then tap Beam. 4. Select either Handheld or Card from the Beam From pick list. 77