Panasonic 55 Professional Display for Entry-Level Digital Signage Operating In - Page 36
H-position], H-size], Clock, phase], For RGB IN or PC IN input, Dot clock], Over scan]
View all Panasonic 55 Professional Display for Entry-Level Digital Signage manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
[H-position] Adjust the horizontal position with . [H-size] Adjust the horizontal size with . Note ● In some cases, noise appears outside the area picture is displayed, but it is not a malfunction. [V-position] Adjust the vertical position with . [V-size] Adjust the vertical size with . [Clock phase] [Dot clock] [Over scan] (For RGB IN or PC IN input) In some cases, frame of the screen appears blurred or smudged, when RGB signal or PC signal are input. (For RGB IN or PC IN input) Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, adjust so that any such noise is minimized. Turn image over scan On/Off. Applicable input signal: 525i, 525p, 625i, 625p, 750/60p, 750/50p (Component Video, RGB, DVI-D, HDMI) [1:1 Pixel Mode] [On] [Off] Note ● When [Off] is set, [H-size] and [V-size] cannot be adjusted. Adjusts the display size when 1125i or 1125p signal is input. [Off] [On] Applicable input signal: 1125 / 50i, 60i, 24PsF, 24p, 25p, 30p, 50p, 60p Note ● Select [Off] when flickering is shown around the image. ● [H-size] and [V-size] cannot be adjusted when [On] is selected. 36 English