Panasonic 55 Professional Display for Entry-Level Digital Signage Operating In - Page 73

Other ● This device is compatible with Panasonic devices that support DIGITAL LINK output (ET-YFB100G, ETYFB200G). For the twisted pair cable transmitter of other manufacturers, see the web site: http://panasonic.net/prodisplays/support/digitallink.html ● Panasonic has tested other manufacturers' devices according to our check items. This will not guarantee all the operations. For operation and performance defects caused by other manufacturers' devices, contact each manufacturer. Command control Network function of the unit can control the unit in the same way as serial control from a network. Supported commands Commands used in the serial control are supported. (see page 22) Control Command via LAN The communication differs whether [Options] - [LAN control protocol] is set to [Protocol 1] or [Protocol 2]. 1. When [LAN control protocol] is set to [Protocol 1]. Communicates using the display-specific protocol. ■■When the WEB control administrator privileges password has been set (Protect mode) Connection method 1 Obtain the display's IP address and the port number (Default is 1024), and request connection to the display. The IP address and the port number can be obtained from the following menus. •• IP address: [Setup] → [Network settings] → [LAN setup] or [Network status] •• Port number: [Setup] → [Network settings] → [LAN setup] For more detail of the settings, see page 54, 55. 2 The display responds. Response data Data part Space Mode [PDPCONTROL] (ASCII character string) [ ] 0x20 10 bytes 1 byte [1] 0x31 1 byte Random Last Space number terminal part symbol [ ] 0x20 [zzzzzzzz] (ASCII code hex number) (CR) 0x0d 1 byte 8 bytes 1 byte Mode: 1 = Protect mode 3 Hash the following data with the MD5 algorithm, and generate a 32-byte hash value. [zzzzzzzzyyyyy] zzzzzzzz : 8-byte random number obtained in step 2 yyyyy : WEB control administrator privileges user ● Default user name and password are as follows: User name: admin1 Password: panasonic Command transmission method Transmit in the following command format Transmitted data Header Control symbol Data part Control symbol Last terminal symbol Hash value (see "Connection method") (STX) 0x02 Control command (ASCII character string) (ETX) 0x03 (CR) 0x0d 32 bytes 1 byte Undefined 1 byte 1 byte Received data Control symbol (STX) 0x02 Data part Control command (ASCII character string) 1 byte Undefined Control Last terminal symbol symbol (ETX) 0x03 (CR) 0x0d 1 byte 1 byte Error response Error message "ERR1" : Undefined control command Last terminal symbol "ERR2" : O ut of parameter range "ERR3" "ERR4" : B usy status or reception invalid period : T imeout or reception invalid period (CR) 0x0d "ERR5" : W rong data length "PDPCONTROL : Mismatching of ERRA" password 4 bytes or 15 bytes 1 byte English 73