Panasonic 55 Professional Display for Entry-Level Digital Signage Operating In - Page 61
Set with, Press <SETUP> to exit from [Options], menu., Input search, Select the item
View all Panasonic 55 Professional Display for Entry-Level Digital Signage manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
5 Set with . 6 Press to exit from [Options] menu. Note ● The remote control is necessary to display the [Options] menu. The control panel buttons on the main unit cannot be used to display the menu. ● Press to return to the previous menu. ● The serial number of this device is displayed when [Display serial number] is selected in step 3. ● The software License is displayed when [Software licenses] is selected in step 3. Input search When a signal is not detected, another input with a signal is automatically selected. Select the item with . Select the set point with . Input search Input search 1st search input 2nd search input Custom (None) (None) [Input search] [Off]: When there is no signal, the input is not switched automatically. [All inputs]: Searches all inputs and switches to an input with a signal. Input search is executed in the following order. (Example) When the current input is [HDMI1] [HDMI2] → [DIGITAL LINK USB] → [HDMI1] *: LF80 series only Note ● The inputs set to [(Skip)] in [Input label] (page 49) are skipped when searching. [Custom]: Repeatedly searches [Current input], [1st search input] and [2nd search input] in order, and switches to an input with a signal. PC 16:9 Searching... [Searching...] is displayed during the input search. [1st search input], [2nd search input] Set the input to search when [Custom] is selected. [HDMI1] / [HDMI2] / [DIGITAL LINK]*1 / [DVI-D] / [PC] / [COMPONENT]*2 / [VIDEO] / [USB] / (None) *1: [DIGITAL LINK] is for LF80 series only. *2: [COMPONENT] may be displayed as [RGB] depending on the settings of [Component/RGB-in select]. (see page 46) Note ● This menu will be greyed out and cannot be set under the following conditions. •• [Input lock] is not set to [Off]. (see page 66) •• [Failover/Failback] - [Input change mode] is not set to [Off]. (see page 62) ● If the input is changed by this function, the last input is selected when the power is turned on next time. If you wish to retain the original input when the power is turned on, set [Initial input] to the original input. English 61