Panasonic AG-HPX600PJB Operating Instructions - Page 166
Copying the proxy data to a SD memory card
View all Panasonic AG-HPX600PJB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Chapter 11 Additional Functions from the Optional Board - Video encoder board (AG‑YDX600G) Error displays (viewfinder screen) [SD CARD WRITE ERR] Behavior and cause Proxy data recording to the SD memory card will stop, but recording to the P2 card will continue. This error message is displayed when the [REC MEDIA] item on the setting menu [PROXY SETTING] screen is set to [P2&SD] and the proxy data cannot be recorded to the SD memory card. rr If the error message is displayed when recording starts: ffThe SD memory card format is different ffThe SD memory card contains more than 1000 clips ffAn attempt is made to record to an SD memory card containing data for updating the firmware of the camera. rr If the error message is displayed during recording: ffThe SD memory card was ejected during recording ffAn error occurred in recording to the SD memory card [NO SD CARD!] or [SD CARD Proxy data will not be recorded to the SD memory card, but PROTECTED] recording to the P2 card will be performed. ffNo SD memory card is inserted. [NO SD CARD!] ffThe SD memory card is write-protected. [SD CARD PROTECTED] Action to take Check the status of the SD memory card and insert a recordable card. (page 163) Check the status of the SD memory card. Copying the proxy data to a SD memory card 1 Press the button to display the thumbnail screen. 2 Use the cursor buttons to move the pointer to the clip to be copied, and press the button. 3 Press the button. 4 Use the cursor buttons and the button to select [OPERATION] → [COPY] → [SD CARD] → [YES]. @@NOTE tt If [EOM (SD)] is displayed and the proxy data being recorded to the SD memory card is deleted, perform this procedure to copy the proxy data from the P2 card, and enable the deleted proxy data to be restored. tt The original materials will not be copied. - 166 -