Panasonic AG-HPX600PJB Operating Instructions - Page 67
Retention of user bits in memory, Frame rate information recorded to user bits, Frame rate information
View all Panasonic AG-HPX600PJB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Chapter 4 Adjustments and Settings for Recording - Setting the time data 42 HOLD COUNTER RESET MONITOR SEL LIGHT TC NDF SLABE P -REC CAM 0 AUDIO -10 MEDIA CH1 A -18 E F -20 BATT CH2 E F -30 SET UP dB 12 3 HOME /REW STOP FF/ PLAY/PAUSE 1 1 button 2 button 3 button 4 button 1 Use the button to set the SmartUI screen to the [HOME] screen. 2 Use the button to set the counter display to [UB]. 3 Use the button to set the SmartUI screen to the [SET01:TC/UB] screen. 4 Set the [UBG] item to [SET]. 5 Set the user bits. Item name [RST] Description The digit to be set (displayed inverted) moves to the right. The value of the inverted digit is incremented by one. The value of the inverted digit is decremented by one. The values of all digits are reset to 0. 6 Press [UBG] to apply the user bit setting values and end setting of user bits. @@NOTE tt Newly set values are invalid if the screen is switched without pressing [UBG]. 7 Select [USER] at the [UB MODE] item on the setting menu [RECORDING SETUP] screen. For details, refer to "Setting menu basic operations" (page 118). Retention of user bits in memory User bit settings are automatically saved in memory and are retained even if the power is turned off. Frame rate information recorded to user bits If the frame rate value of video information to be shot and recorded based on the frame rate set by each item on the setting menu [SYSTEM SETUP] screen or by the [FRAME RATE] item (option) is recorded in the user bits, it can be edited the editing device (such as computer editing software). This information is recorded to VITC UB at all times. If the setting menu [UB MODE] item is set to [FRM.RATE], it is also recorded to user bits (LTC UB). In playback of clips recorded in native format, the same values as the frame rate information obtained by playing back recorded user bits are also output as HD SDI output signals or user bits of TC output from the terminal. Frame rate information The frame rate and video pull-down menu are linked to the time code and user bits as follows: Checking information for the 6 digits at right Fixed Media management information value ɾ Updated frame flag, valid frame flag Sequence No. 24P, 24PA: 0 - 4 ɾ REC mark Other than the above: Fixed at F Camera video mode Example)ɾ60iɿ600 ɾ60Pɿ608 ɾ30Pɿ308 ɾ24Pɿ248 ɾ24PAɿ24C ɾ24PNɿ24C (Shooting) ɾˎˎ Pɿˎˎ 9 (720P/30PN or 60P VFR) ɾˎˎ Pɿˎˎ D (720P/24PN VFR shooting) - 67 -