Panasonic CF-19KDRAGCM Reference Manual - Page 42
Insert/Remove the RAM module., Set the cover and battery pack., CAUTION
UPC - 092281895840
View all Panasonic CF-19KDRAGCM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
RAM Module 42 4 Insert/Remove the RAM module. z To insert A Tilt the module slightly and insert it in the slot. B Press down the module so that the right and left hooks (C) are locked. z To remove A Carefully open the right and left hooks (C). The module will rise. B Carefully remove the module from the slot. 5 Set the cover and battery pack. CAUTION z Set the cover and battery pack correctly so that they do not fall when you carry the computer. NOTE z If it is hard to insert or to press down the RAM module, do not try forcibly but check the module's direction. z Use the appropriate screw driver so as not to strip the thread of screw. z If the RAM module is recognized correctly, the total size of the RAM module memory is displayed on the [Information] menu of the Setup Utility (Î page 70). If the RAM module is not recognized, power off the computer and insert it again.