Panasonic CF-19KDRAGCM Reference Manual - Page 54
Enabling the Power On by LAN function
UPC - 092281895840
View all Panasonic CF-19KDRAGCM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
LAN 54 Enabling the Power On by LAN function The computer automatically turns from off to on when the computer is accessed from the network server via the internal LAN port. 1 Select [Allow] in [Power On by LAN] in the [Advanced] menu of the Setup Utility (Î page 73). 2 In [Caution], press Enter. 3 Press F10, and then select [Yes] and press Enter. 4 Log on to Windows as an administrator. 5 Click (Start) - [Computer] - [System Properties] - [Device Manager], double-click [Net- work adapters] - [Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller], and click [Advanced]. 6 Click [Wake From Shutdown] in [Property] and select [On] in [Value], and then click [OK]. NOTE z The computer may accidentally turn on if the linkage status is changed. To prevent the accidental startup, make the setting by the following steps. A Click (Start) - [Computer] - [System Properties] - [Device Manager], double-click [Network adapters] - [Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller], and click [Advanced]. B Click [Wake Up Capabilities] in [Property] and select [Magic Pocket] in [Value], and then click [OK].