Panasonic DMC-LZ10S Digital Still Camera - Page 102
Windows 2000 OS PC with the USB, When using Windows PC, click Safety
![]() |
UPC - 037988987344
View all Panasonic DMC-LZ10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Connecting to other equipment • Do not use any other USB connection cables except the supplied one. • While [ACCESS] is being displayed, do not disconnect the USB connection cable. • When using Windows PC, click Safety Remove Hardware icon on the task trey first to remove USB cable. When the icon is not displayed, make sure the connection screen is not displayed, and turn the camera [OFF] to remove. • When connecting the camera to a Windows 2000 OS PC with the USB connection cable, do not replace the card while the camera and the PC are connected. The information on the card may be damaged. Before changing cards, make sure you perform the necessary steps to safely remove hardware (double-click the icon in the task bar in Windows). • When there are many pictures on the built-in memory or the card, it may take some time to transfer them. • Motion image files in the built-in memory or on a card in this unit may not play properly on a computer, so upload them to your computer for playback. • If the remaining battery power becomes low while the camera and the PC are communicating, the status indicator blinks and the alarm beeps. In this case, stop the communication at once on the PC. • Pictures edited or rotated with a PC may be displayed in black in playback mode, multi playback and calendar. • If a card is not inserted when the camera is connected to the PC, you can edit or access the picture data on the built-in memory. If a card is inserted, you can edit or access the picture data on it. • You cannot switch between the built-in memory and the card while the camera is connected to the PC. When you want to switch between the built-in memory and the card, disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the PC again. • When connecting the camera to a Mac OS v10.2 or lower and using SDHC Memory card to inport the picture data, set the Write-Protect switch on the SDHC Memory Card to [LOCK]. • Refer to the operating instructions of the PC, too. 102 VQT1L86
![](/manual_guide/products/panasonic-dmc-lz8k-digital-camera-2d82a9f/102.png)