Panasonic DMC-LZ10S Digital Still Camera - Page 107
Playing Back Pictures with a TV Screen
UPC - 037988987344
View all Panasonic DMC-LZ10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Connecting to other equipment Playing Back Pictures with a TV Screen ■ Playing back pictures using the AV cable (supplied) • Set the [TV ASPECT]. (P23) • Turn the camera and the TV off. 1 2 AV OUT DIGITAL B A 1 Connect the AV cable A (supplied) to the [AV OUT] socket of the camera. • Connect the AV cable with the [c] mark facing the [q] mark on the [AV OUT] socket. • Hold B and then insert or pull the AV cable straight. 2 Connect the AV cable to the video input and the audio input sockets on the TV. 1 Yellow: to the video input socket 2 White: to the audio input socket 3 Turn the TV on and select external input. 4 Turn the camera on and playback the picture. • Do not use any other AV cables except the supplied one. • The top and bottom or left and right of the picture may be cut off slightly when it is displayed due to the characteristics of the TV. • Read the TV operating instructions too. • Pictures might be slightly blurred if you show them vertically on a television. • Set the volume of this unit to 0 when outputting audio.(P21) • You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system when you set [VIDEO OUT] in the [SETUP] menu. Even if you set [VIDEO OUT] to [PAL], the output signal will still be NTSC in the recording mode. ■ Playback pictures on TV with SD Memory Card slot You can put your SD Memory Card in a television with an SD Memory Card slot to show still images. • Depending on the television, some pictures may not take up the whole screen. • You cannot play motion pictures. To play back motion pictures, connect the camera to the TV with the AV cable (supplied). • You can use SDHC Memory Card only on SDHC Memory Card compatible TV. • You may be unable to play MultiMedia Cards. 107 VQT1L86