Panasonic DMC-LZ10S Digital Still Camera - Page 115
from the actual scene., of the picture differs
UPC - 037988987344
View all Panasonic DMC-LZ10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Others Conditions Causes The subject is not The focus range varies depending on the recording mode. focused properly. Set the proper recording mode for the distance to the subject. Is the subject out of the focus range? (P30, 46) Have you taken a picture with jitter? The subject is not focused until the shutter button is pressed halfway. (However, this excludes intelligent auto mode [ ].) The recorded picture When taking a picture in shaded areas or indoors, the shutter is blurred. The optical speed becomes slow and the Optical Image Stabilizer function image stabilizer is not may not work properly. In this case, we recommend holding the effective. camera with both hands firmly to take pictures. Images are grainy or Is the ISO sensitivity high or the shutter speed slow? noisy. (When set to [AUTO], ISO sensitivity increases for indoor and other shooting occasions.) • Reduce ISO sensitivity. (P70) • Enhance [NOISE REDUCTION] of [PICT.ADJ.] or, lower the setting for each items other than [NOISE REDUCTION]. (P76) • Improve the ambient light. In [HIGH SENS.] and [HI-SPEED BURST] in scene mode, the resolution of the recorded picture decreases slightly because of high sensitivity processing. This is not a malfunction. The brightness or color Brightness and colors may change when using a fast shutter of the picture differs speed under fluorescent lights, but this is a characteristic of from the actual scene. such lighting and is not a malfunction. Shooting of motion pictures stops unexpectedly. This camera is not compatible with motion picture recording on MultiMediaCards. • When you set the [PICTURE MODE] to [30fpsVGA] or [30fps16:9], we recommend using cards that offer 10 MB/second or higher speeds (shown on their packages and elsewhere) for best results. • Depending on the type of SD Memory Card or SDHC Memory Card, recording may stop in the middle. Reddish vertical lines • This is a phenomenon called smear. It appear on the LCD is a characteristic of CCD and appears monitor while shooting when the subject has a bright part. Irregularities may also appear around the smear, but this is not a malfunction. (It is recorded in motion pictures but not on still pictures.) • We recommend not to let a strong source of light such as the sun light enter the screen when taking pictures. 115 VQT1L86