Panasonic DMC-LZ10S Digital Still Camera - Page 114
Troubleshooting
![]() |
UPC - 037988987344
View all Panasonic DMC-LZ10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Others Troubleshooting If you put the menu back to the settings at the time of purchase, the conditions may be improved. Carry out the [RESET] in the setup menu while the camera is in the recording mode. (P23) ■ Batteries and power supply Conditions Causes The camera turns off The remaining battery power may not be displayed immediately even when accurately, and the camera may suddenly stop working, when battery power is full. the type of battery and the settings on [BATTERY TYPE] are The remaining battery not identical. However this is not a malfunction. Depending power is low even if new on the battery brand and the operating temperature, or if batteries are inserted. exhausted batteries are used, the remaining battery power may not be displayed accurately. Please check [BATTERY TYPE] (P21) in the [SETUP] menu. The camera will not turn Are the batteries inserted correctly? on. Use sufficiently charged batteries when using Ni-MH batteries. The picture is not Is the economy mode (P22) activated? Press the shutter displayed on the LCD button halfway to deactivate these modes. monitor. Are the batteries exhausted? Replace them with batteries which have sufficient capacity. (When you use Ni-MH batteries, charge them.) The camera turns off • Are the batteries exhausted? Replace them with batteries soon after turning it on. which have sufficient capacity. (When you use Ni-MH batteries, charge them.) • If you leave the camera on, the battery will be exhausted. Turn the camera off frequently by using economy mode (P22) etc. ■ Shooting Conditions Causes The picture cannot be Is the mode correctly set? recorded. Is there any memory capacity left on the built-in memory or the card? Before recording, delete some pictures. (P38) The recorded pictures The picture can become whitish if there is dirt e.g. fingerprints are pale. on the lens. If the lens is dirty, turn on the camera, eject the lens barrel and gently wipe the lens surface with a soft dry cloth. The recorded picture is Check that the exposure is correctly compensated. (P48) too bright or dark. 2 or 3 pictures are taken Is auto bracket (P49), [HI-SPEED BURST] (P60) or burst at one time. (P75) mode set? 114 VQT1L86
![](/manual_guide/products/panasonic-dmc-lz8k-digital-camera-2d82a9f/114.png)