Panasonic DMC LZ2 Digital Still Camera - Page 100
The flash is activated 2 times., Flash is not activated.
UPC - 037988985074
View all Panasonic DMC LZ2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Others ∫ LCD monitor 1: The brightness of the screen becomes dark or bright for a moment. • This phenomenon appears when pressing the shutter button halfway to set the aperture value and does not affect the recorded pictures. 2: The flash is activated 2 times. • When you select AUTO/Red-eye reduction [ ], the first flash is activated for red-eye prevention on the subject (red-eye phenomenon) before actually recording pictures. After the first flash, the flash is activated again for recording. 2: The screen is too bright or dark. • Adjust the brightness of the screen. 3: Some pixels are inactive or always lit on the LCD monitor. • These pixels do not affect the recorded pictures. This is not a malfunction. ∫ Playback 1: Pictures being played are rotated and displayed in an unexpected direction. The camera has a function to automatically rotate and display pictures recorded by holding the camera vertically. 4: Noise appears on the LCD monitor. • In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not affect the pictures you are recording. 5: A vertical red line appears on the LCD monitor. • This is called smear. It is specific to CCD, not a malfunction. It appears when the subject has a bright part. It is recorded on motion images, but not recorded on still pictures. ∫ Flash 1: Flash is not activated. • Is the flash setting set to Forced OFF [ ]? - Change the flash setting. (P40) • The flash is not activated when in motion image mode [ ], [SCENERY], [NIGHT SCENERY], or [FIREWORKS] in scene mode (P57) is selected. (If you take pictures aiming the camera up or down, the camera may recognize that it is held vertically.) • When [ROTATE DISP.] (P72) is set to [OFF], you can display the pictures without being rotated. • You can rotate pictures with [ROTATE] function (P72). 2: The picture is not played back. • Is the mode dial set to playback [ ]? • Is there a picture in the built-in memory or the card? When a card is not inserted, the picture data in the built-in memory appear. When a card is inserted, the picture data in the card appear. (P20) 3: The picture played back looks rough. Noise appears on the picture. • Is the ISO sensitivity is high or is the shutter speed slow? - Decrease the ISO sensitivity. (P65) - Set [PICT.ADJ.] to [NATURAL]. (P69) - Take pictures in bright places. 100 VQT0P65