Panasonic DMC LZ2 Digital Still Camera - Page 87
PictBridge PTP setting, Folder Composition
UPC - 037988985074
View all Panasonic DMC LZ2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Connecting to a PC or Printer ∫ Folder Composition • If the remaining battery power becomes The folder structure of the built-in memory, low during communication, the status the card or MultiMediaCard is displayed as indicator blinks and the alarm beeps. In the illustration below. this case, stop the communication at ≥Built-in memory ≥SD Memory Card ≥MultiMediaCard DCIM 100_PANA 1 once. • While [ACCESS] is being displayed, do not disconnect the USB connection cable. • When the OS of your PC is Windows 100_PANA P1000001.JPG 23 P1000002.JPG 2000 and you connect the camera to the PC with the USB connection cable, do not replace the card with the camera connected to the PC. The information in the card may be P1000999.JPG 101_PANA damaged. • Do not use any other USB connection cables except the supplied one. • For more information, refer to the separate 999_PANA MISC 1 Folder number 2 File number 3 JPG: pictures MOV: motion images Files will be saved in each folder as follows. operating instructions about PC connection. • Also refer to the operating instructions of the PC. • If the card is not inserted when the camera is connected to a PC, you can edit or access the picture data in the built-in memory. If the card is inserted, you can DCIM 100_PANA MISC Folders from [100_PANA] to [999_PANA] Pictures/motion images Files on which the DPOF print settings are recorded • When recording, up to 999 picture data can be included in 1 folder. If the number of picture data exceeds 999, another folder will be created. edit or access the picture data in it. • You cannot switch the recording medium between the built-in memory and the card while the camera is connected to the PC. When you want to switch the recording medium, disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the PC again. • When you reset the file number or the folder number, select [NO.RESET] in the [SETUP] menu. (P24) ∫ PictBridge (PTP) setting Even if you set the [USB MODE] to [PictBridge (PTP)], you can connect to the PC only when the OS is Windows XP • If the remaining battery power is exhausted during communication, the recorded data may be damaged. When you connect the camera to the PC, use batteries with sufficient battery power (P14) or the AC adaptor (DMW-AC1; optional). Home Edition, Windows XP Professional or Mac OS X. • You can only load pictures from the camera and cannot write them on the card or delete them. • When there are 1000 or more pictures on a card, the pictures may not be imported. 87 VQT0P65