Panasonic DMCFZ100 DMCFZ100 User Guide - Page 109

Advanced (Recording pictures) • Refer to P150 for the [MOTION PICTURE] Mode menu. • The flash setting is fixed to [Œ]. • Refer to P238 for information about the available recording time. • The available recording time displayed on the screen may not decrease regularly. • Depending on the type of the card, the card access indication may appear for a while after recording motion pictures. This is not a malfunction. • The operational sound of the zoom or button operation may be recorded when it is operated during the recording of a motion picture. • The screen may be blacked out momentarily, or the unit may record noise due to static electricity or electromagnetic waves etc. depending on the environment of the motion picture recording. • When operating the zoom in recording motion pictures, it may take time to come into focus. • If the Extended Optical Zoom was used before pressing the motion picture button, those settings will be cleared, so the focus range will change dramatically. • Even if the aspect ratio setting is the same in still and motion pictures, the angle of view may change at the start of the motion picture recording. When [ REC AREA] (P33) is set to [ON], angle of view during motion picture recording is displayed. A Example image: When [REC QUALITY] is set to [AVCHD(1080i)] and the [ASPECT RATIO] is set to [W]. B: This section is not recorded in motion pictures. • [STABILIZER] is fixed to [MODE1] in recording motion pictures. • In recording motion pictures, the following functions cannot be used. - Direction Detection function - Extended Optical Zoom - [FACE RECOG.] • It is recommended to use a fully charged battery or AC adaptor (optional) when recording motion pictures. (P22) • If while recording motion pictures using the AC adaptor (optional) the power supply is cut off due to a power cut or if the AC adaptor (optional) is disconnected etc., the motion picture being recorded will not be recorded. - 109 -