Panasonic DMCFZ100 DMCFZ100 User Guide - Page 77
Taking Pictures with the Self-Timer, Press, to select a mode., Press [MENU/SET].
View all Panasonic DMCFZ100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Advanced (Recording pictures) [REC] Mode: Taking Pictures with the Self-Timer Press 2 [ë]. Press 3/4 to select a mode. • You can also press 2 [ë] to select. • If you set [10S/3PICTURES], after 10 seconds the camera takes 3 pictures at about 2 second intervals. Press [MENU/SET]. • You can also press the shutter button halfway to finish. • The menu screen disappears after about 5 seconds. At this time, the selected item is automatically set. Press the shutter button halfway to focus and then press it fully to take the picture. • The Self-Timer indicator A blinks and the shutter is activated after 10 seconds (or 2 seconds). • If you press [MENU/SET] while the Self-Timer is set, the Self-Timer setting is canceled. • When [10S/3PICTURES] is selected, the Self-Timer indicator blinks again after the first and the second pictures are taken and the shutter is activated 2 seconds after it blinks. A Note • When using a tripod etc., setting the Self-Timer to 2 seconds is a convenient way to avoid the jitter caused by pressing the shutter button. • When you press the shutter button once fully, the subject is automatically focused just before recording. In dark places, the Self-Timer indicator will blink and then may turn on brightly operating as an AF assist lamp (P147) to allow the camera to focus on the subject. • We recommend using a tripod when recording with the Self-Timer. • The number of pictures which can be taken in Burst Mode is fixed to 3. • The number of pictures which can be taken in [FLASH BURST] (P101) is fixed to 5. • Depending on the recording conditions, the recording interval may become more than 2 seconds when [10S/3PICTURES] is selected. • The flash output may not be constant when [10S/3PICTURES] is selected. • [10S/3PICTURES] cannot be set when any of Intelligent Auto Mode, Auto Bracket or [PANORAMA ASSIST], [FLASH BURST] or [PHOTO FRAME] in Scene Mode is set. • You cannot use Burst Mode when [10S/3PICTURES] is selected. • Setting of the Self-Timer cannot be performed when recording motion pictures. - 77 -