Panasonic DMCFZ100 DMCFZ100 User Guide - Page 219
This Card Is Not Formatted With This Camera, And Not Suitable
View all Panasonic DMCFZ100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
Others [THIS CARD IS NOT FORMATTED WITH THIS CAMERA, AND NOT SUITABLE FOR MOVIE RECORDING.] • The writing speed is lower if the card has been formatted using a PC or other equipment. As a consequence, motion picture recording may stop in the middle. If this happens, make a backup of the data and format (P39) the card in this unit. [CANNOT RECORD DUE TO INCOMPATIBLE FORMAT(NTSC/PAL) DATA ON THIS CARD.] > If you want to delete some pictures, format the card after saving necessary data on a PC etc. (P39) > Insert a different card. [A FOLDER CANNOT BE CREATED] • A folder cannot be created because there are no remaining folder numbers that can be used. (P195) > Format the card after saving necessary data on a PC etc. (P39) If you execute [NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100. (P36) [PICTURE IS DISPLAYED FOR 16:9 TV]/[PICTURE IS DISPLAYED FOR 4:3 TV] • The AV cable is connected to the camera. > Press [MENU/SET] if you want to delete this message at once. > Select [TV ASPECT] in the [SETUP] menu if you want to change the TV aspect. (P37) • This message also appears when the USB connection cable is connected to the camera only. In this case, connect the other end of the USB connection cable to a PC or a printer. (P192, 196) [PRINTER BUSY]/[PLEASE CHECK THE PRINTER] • The printer cannot print. > Check the printer. [NO BATTERY POWER REMAINS] • The remaining battery power is low. > Charge the battery. [THIS BATTERY CANNOT BE USED] • The battery cannot be recognized by the camera. > Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic battery is used, contact the dealer or your nearest Service Center. • The battery cannot be recognized as its terminal is dirty. > Remove any dirt etc. from the terminal. [PLEASE MAKE SURE TO TURN ON THE POWER OF EXTERNAL MICROPHONE.] • When attaching the stereo microphone (DMW-MS1; optional), check the battery status and make sure the power is on before use. (P208) - 219 -