Panasonic DMCFZ100 DMCFZ100 User Guide - Page 73
Shutter speed for each flash setting, Shutter speed Sec.
View all Panasonic DMCFZ100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Advanced (Recording pictures) ∫ Shutter speed for each flash setting Flash setting ‡ Shutter speed (Sec.) Flash setting 1/60¢1 to 1/2000th ‰ Œ Shutter speed (Sec.) 1¢1 to 1/2000th ¢1 It may vary depending on the [MIN. SHTR SPEED] setting (P145). • Refer to P87 for details about the Aperture-Priority AE, Shutter-Priority AE, and Manual Exposure. • In Intelligent Auto Mode, shutter speed changes depending on the identified scene. • In Advanced Scene Mode (P91) and Scene Mode (P96), the shutter speeds will differ from those described above. Note • Do not bring the flash too close to objects or close the flash while it is activated. The objects may be discolored by its heat or lighting. • Do not close the flash soon after the flash is activated prior to taking pictures due to AUTO/ Red-Eye Reduction etc. It causes a malfunction. • When you take a picture beyond the available flash range, the exposure may not be adjusted properly and the picture may become bright or dark. • When the flash is being charged, the flash icon blinks red, and you cannot take a picture even when you press the shutter button fully. • The White Balance may not be properly adjusted if the flash level is insufficient for the subject. • The flash effect may not be sufficient when using [FLASH BURST] (P101) in Scene Mode or when shutter speed is fast. • When taking a picture with the flash, we recommend removing the lens hood. In some cases it may not allow the scene to be illuminated properly. • It may take time to charge the flash if you repeat taking a picture. Take a picture after the access indication disappears. • The Red-Eye Reduction effect differs between people. Also, if the subject was far away from the camera or was not looking at the first flash, the effect may not be evident. • Flash is fixed to [Œ] when the [CONVERSION] (P149) is set to [ ] or [ C ]. - 73 -