Panasonic DMCFZ100 DMCFZ100 User Guide - Page 62

Basic Using the Playback Zoom Rotate the zoom lever towards [Z] (T). 1k>2k>4k>8k>16k • When you rotate the zoom lever towards [L] (W) after enlarging the picture, the magnification becomes lower. • When you change the magnification, the zoom position indication A appears for about 1 second, and the position of the enlarged section can be moved by pressing 3/4/2/1. • The more a picture is enlarged, the more its quality deteriorates. • When you move the position to be displayed, the zoom position indication appears for about 1 second. • Focus point will be enlarged when [FOCUS] is pressed. (P63) W T A ∫ Switching the displayed image while maintaining the Playback Zoom Rotating the rear dial to select the picture during Playback Zoom. • You can switch the displayed image while maintaining the same zoom magnification and zoom position for the Playback Zoom. Note • You can also delete the recording information etc. on the LCD monitor/Viewfinder during Playback Zoom by pressing [DISPLAY]. • If you want to save the enlarged picture, use the Cropping function. (P172) • The Playback Zoom may not operate if pictures have been recorded with other equipment. • The zoom magnification and the zoom position are canceled when the camera is turned off (including Sleep Mode). • The zoom position returns to the center in the following images. - Images with different aspect ratios - Images with different numbers of recorded pixels - Images with a different rotation direction (when [ROTATE DISP.] is set to [ON]) • Playback Zoom is not available during Motion Picture Playback. - 62 -