Panasonic DMCFZ100 DMCFZ100 User Guide - Page 178
and then press [MENU/SET]., to select [YES] and then press [MENU/SET].
View all Panasonic DMCFZ100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Advanced (Playback) ∫ Canceling all the [PRINT SET] settings 1 Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET]. 2 Press 3 to select [YES] and then press [MENU/SET]. 3 Press [MENU/SET] to close the menu. • You cannot select [CANCEL] if not even one picture has been set for printing. ∫ To print the date After setting the number of prints, set/cancel printing with the recording date by pressing [DISPLAY]. • When you go to a photo printing store for digital printing, be sure to order the printing of the date additionally if required. • Depending on the photo printing store or the printer, the date may not be printed even if you set to print the date. For further information, ask at your photo printing store or refer to the operating instructions for the printer. • The date cannot be printed on pictures stamped with text. Note • The number of prints can be set from 0 to 999. • With a printer supporting PictBridge, the date print settings of the printer may take precedence so check if this is the case. • It may not be possible to use the print settings with other equipment. In this case, cancel all the settings, and reset the settings. • [PRINT SET] cannot be set for motion pictures and pictures that were taken with the [QUALITY] set to [ ]. • If the file is not based on the DCF standard, the DPOF print setting cannot be set. - 178 -