Panasonic DMCFZ100 DMCFZ100 User Guide - Page 72
The available flash range to take pictures, Adjust the flash output
View all Panasonic DMCFZ100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Advanced (Recording pictures) ∫ The available flash range to take pictures • The available flash range is an approximation. ISO sensitivity AUTO Available flash range Wide Tele 30 cm (0.99 feet) to 9.5 m (31.16 feet)¢ 1.0 m (3.28 feet) to 5.1 m (16.73 feet)¢ ISO100 30 cm (0.99 feet) to 3.3 m (10.82 feet) 1.0 m (3.28 feet) to 1.8 m (5.90 feet) ISO200 40 cm (1.32 feet) to 4.7 m (15.41 feet) 1.0 m (3.28 feet) to 2.5 m (8.20 feet) ISO400 60 cm (1.97 feet) to 6.7 m (21.98 feet) 1.0 m (3.28 feet) to 3.6 m (11.81 feet) ISO800 80 cm (2.62 feet) to 9.5 m (31.16 feet) 1.0 m (3.28 feet) to 5.1 m (16.73 feet) ISO1600 1.15 m (3.77 feet) to 13.5 m (44.29 feet) 1.0 m (3.28 feet) to 7.3 m (23.95 feet) • In [HIGH SENS.] (P100) in Scene Mode, the ISO sensitivity automatically switches to between [ISO1600] and [ISO6400] and the available flash range also differs. Wide: Approx. 1.15 m (3.77 feet) to approx. 27.1 m (88.91 feet) Tele: Approx. 1.0 m (3.28 feet) to approx. 14.6 m (47.9 feet) • In [FLASH BURST] (P101) in Scene Mode, the ISO sensitivity automatically switches to between [ISO100] and [ISO3200] and the available flash range also differs. Wide: Approx. 30 cm (0.99 feet) to approx. 4.0 m (13.1 feet) Tele: Approx. 1.0 m (3.28 feet) to approx. 2.1 m (6.88 feet) ¢ When the [ISO LIMIT SET] (P135) is set to [AUTO] ∫ Adjust the flash output Adjust the flash output when the subject is small, or the reflectivity is very high or low. 1 Press 3 (È) several times to display [FLASH], and then press 2/1 to set the flash output. • You can adjust from [j2 EV] to [i2 EV] in steps of [1/3 EV]. • Select [0 EV] to return to the original flash output. 2 Press [MENU/SET] to close the menu. • You can also close the menu by pressing the shutter button halfway. Note • When the flash output is adjusted, the flash output value appears on the upper left of the screen. • The flash output setting is memorized even if the camera is turned off. • You cannot set [FLASH] in the following cases. - In Intelligent Auto Mode - In [SCENERY] - In [NIGHT SCENERY], [ILLUMINATIONS] and [CREATIVE NIGHT SCENERY] in [NIGHT PORTRAIT] - In [PANORAMA ASSIST], [SUNSET], [FLASH BURST], [STARRY SKY], [FIREWORKS], [AERIAL PHOTO] and [HIGH SPEED MOVIE] in Scene Mode - In Creative Motion Picture Mode - 72 -