Panasonic DMCFZ100 DMCFZ100 User Guide - Page 11
Rotating the LCD monitor
View all Panasonic DMCFZ100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Before Use Rotating the LCD monitor At the time when this camera is purchased, the LCD monitor is stowed in the camera body. Bring out the LCD monitor as shown below. 1 Open the LCD monitor. (Maximum 180o) 2 It can be rotated 180o forwards. 3 Return the monitor to its original position. Rotation range of the LCD monitor ∫ Horizontal opening direction ∫ Vertical rotating direction 4 Maximum 180o 5 180o • It can be rotated 180o forwards. 6 90o • It can only be rotated 90o towards you. Note • Only rotate the LCD monitor after opening it wide enough, and be careful not to use excessive force as it may be damaged. • Be careful as this unit may get scratched if you rotate the LCD monitor without opening the LCD monitor fully. • Check that the terminal door is closed when rotating the LCD monitor. The terminal door may get damaged or LCD monitor may get scratched if you rotate the LCD monitor with the terminal door opened. • When holding the edge of the LCD monitor, there may be some distortion, however this is not a malfunction. Moreover, this has no effect on the taken pictures or playback. • When not using the LCD monitor it is recommended that you close it with the screen facing inwards to prevent dirt and scratches. • Be careful as the rotation sound will be recorded when the LCD monitor is rotated during motion picture recording. - 11 -