Panasonic DMCFZ100 DMCFZ100 User Guide - Page 204
Using the Protector/Filter (optional), Turn the camera on., Rotate the zoom lever towards
View all Panasonic DMCFZ100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Others Using the Protector/Filter (optional) The MC protector (DMW-LMC52; optional) is a transparent filter which affects neither the colors nor the amount of light, so it can always be used to protect the camera's lens. The ND filter (DMW-LND52; optional) reduces the amount of light to approximately 1/8th (equal to adjusting the aperture value 3 increments) without affecting the color balance. PL filter (DMW-LPL52; optional) will suppress the reflected light from a metal or non spherical surfaces (flat non-metallic surfaces, water vapour or invisible particles in the air), making it possible to take a picture with enhanced contrast. Turn the camera on. Rotate the zoom lever towards [L] (W), and set the lens barrel to Wide (1k). • Set [CONVERSION] to [OFF]. (P149) • Close the flash. Attach the filter. C A MC protector B ND filter C PL filter Note • Do not attach multiple filters at the same time. • If the filter is tightened too much, you may not be able to remove it. Do not tighten it too much. • You cannot attach the filter when the lens hood is attached. • If the filter is dropped, it may be destroyed. Be careful not to drop it when attaching it to the camera. • Be careful not to get a fingerprint, dirt, etc., on the filter when it is attached, otherwise the focus may be adjusted to the lens, resulting in the subject being out of focus. • Refer to the instructions for each filter for details. - 204 -