Panasonic DMRHS2 DMRHS2 User Guide - Page 10

Getting started Setting up Disc handling Do not use irregularly shaped discs, such as heart-shaped. (These can damage the unit.) ∫ How to hold a disc Do not touch the recorded surface. 1 STEP The remote control Batteries !? R6, LR6, AA, UM-3 ∫ If there is dirt or condensation on the disc !? Moisture may condense on discs after they are brought inside from the cold. DVD-RAM and DVD-R Clean only with the DVD-RAM/PD disc cleaner available as an optional accessory, part number LF-K200DCA1. Do not use cleaners or cloths for CDs to clean DVD-RAM and DVD-R. DVD-Video, CD, Video CD Wipe with a damp cloth and then wipe dry. ∫ Handling precautions ≥Do not write on the label side with a ball-point pen or other writing instrument. ≥Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. ≥Do not attach labels or stickers to discs. (Do not use discs with exposed adhesive from tape or left over peeled-off stickers.) ≥Do not use scratch-proof protectors or covers. ≥Do not use discs printed with label printers available on the mar- ket. ≥Do not use discs that are badly warped or cracked. ∫ Do not place or store discs in the following places ≥Locations exposed to direct sunlight ≥Humid or dusty locations ≥Locations directly exposed to a heat vent or heating appliance ≥Insert so the poles (i and j) match those in the remote control. ≥Do not use rechargeable type batteries. Do not: ≥mix old and new batteries. ≥use different types at the same time. ≥heat or expose to flame. ≥take apart or short circuit. ≥attempt to recharge alkaline or manganese batteries. ≥use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place. [Note] If you cannot operate the unit or television using the remote control after changing the batteries, please re-enter the codes (television➜page 17, main unit ➜page 65). Use !? Remote control signal sensor Í/ I 20x POWER 30x 30x OPEN/CLOSE REC WARP ENTER TOP RETURN 20x 7 m (23 feet) directly in front of the unit Aim at the sensor avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit. 10 RQT6570