Panasonic DMRHS2 DMRHS2 User Guide - Page 58

Home Theater Connecting other video equipment Connecting to the L2 input terminals on the front of the unit [A] !? Connecting to the input terminals on the rear of the unit, L1 and L3 [B] Advanced operation / I POWER yellow white red S video cable§ Audio/Video cable (included) yellow white red i.LINK cable (IEEE 1394) S VIDEO OUT VIDEO L R OUT AUDIO OUT DV OUT OPTICAL R - AUDIO - L VIDEO S-VIDEO (L1) DIGITAL AUDIO OUT (PCM/BIT STREAM) R - AUDIO - L VIDEO S-VIDEO (L3) red white yellow OUT2 IN3 OUT1 IN1 R - AUDIO - L R - AUDIO - L Audio/Video cable (included) S video cable§ red white yellow RL AUDIO VIDEO OUT OUT S VIDEO OUT Other video equipment Connect to the video and audio output terminals. § By using the S video cable instead of the yellow video cable you may make recordings of higher picture quality. [Note] ≥If the audio output of the other equipment is monaural, connect to L/MONO. (Both left and right channels are recorded when connected through L/MONO.) ≥The DV input on this unit is for use with DV equipment only. ≥When DV equipment is connected, it is not possible to operate the unit from the other equipment. ≥Only one piece of DV equipment (e.g., Digital Video Camera) can be connected to the unit via the DV Input terminal. ≥The picture compression system of the DV equipment you have connected may differ from that used in this unit. In such cases, dubbing from these equipments will not be possible. Other video equipment Connect to the video and audio output terminals. § By using the S video cable instead of the yellow video cable you may make recordings of higher picture quality. [Note] If audio output on the other equipment is monaural, use a stereomonaural conversion cable (not included). 58 RQT6570