Panasonic HC-X2000 HC-X1500 Advanced Operating Manual

Panasonic HC-X2000 Manual

Get Panasonic HC-X2000 PDF manuals and user guides View all Panasonic HC-X2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic HC-X2000 manual content summary:

  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 1
    Manual 4K Video Camera )$- 9 Model No. )$- 9 Please read these instructions carefully before using this product, and save this manual for future use. Register online at http://shop.panasonic.com/support (U.S. customers only) If you have any questions, visit : U.S.A. : http://shop.panasonic
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 2
    manual as your convenient camera information source. Date of Purchase Dealer Purchased From Dealer Address Dealer Phone No. Model No. Serial No. U.S.A./CANADA CONSUMERS: ATTENTION: A lithium ion battery this unit by yourself. Refer servicing to qualified service personnel. CAUTION! To reduce the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 3
    . Supplier's Declaration of Conformity Trade Name: Panasonic Model No.: HC-X1500/HC-X2000 Responsible Party: Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Support Contact: http://shop.panasonic.com/support THE FOLLOWING APPLIES ONLY IN CANADA. CAN
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 4
    block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 5
    replaced. Replace only with the type recommended by the manufacturer. ≥ When disposing of the batteries, please contact your local authorities or dealer and ask for the correct method of disposal. ∫ Product Identification Marking Product 4K Video Camera AC adaptor Bottom Bottom Location - 5 -
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 6
    may damage the user's ears. ∫ Caution regarding the lens and the viewfinder Do not aim the lens or the viewfinder at the sun or strong light. Doing so may cause the unit to malfunction. ∫ Batteries that may be used with this product (As of January 2020) Panasonic AG-VBR59/VW-VBD58 batteries may be
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 7
    of Leica Camera AG. . ≥ App Store is a service mark of Apple Inc. ≥ this instruction manual are users for a profit. The end user panasonic.net/cns/oss/index.html How to read this document ∫ Models described in this owner's manual ≥ This document describes the operation of models HC-X1500 and HC-X2000
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 8
    this manual ≥ Words and phrases in [ ] brackets indicate content displayed in the LCD monitor. ≥ Words and phrases in < > brackets indicate design text used on this unit, such as button names. ∫ Reference pages ≥ Reference pages in this document are indicated by (l 00). ∫ Terminology ≥ The battery
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 9
    Handle unit ([X2000] supplied, battery 37 Setting the date/time of the internal clock 38 Preparing the memory card 39 Memory cards supported file/initialization 94 [THUMBNAIL] menu 94 [CAMERA] menu 94 [SCENE FILE] menu 95 (manual light 120 Adjust the amount of light from the built-in LED light
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 10
    screen 142 Multi manual function 143 Displaying 196 Specifications 197 General 197 Camera 197 Memory card recorder 198 Handle unit ([X2000] supplied, [X1500] optional 200 AC adaptor 200 Battery pack ( the HC ROP app 179 Connecting to the HC ROP app 179 Operation while the HC ROP
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 11
    Chapter 1 Overview Before using the unit, read this chapter.
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 12
    . Sand and dust may damage the camera and memory card. (Be careful when inserting or removing the memory card) ∫ AC adaptor and battery ≥ It may take more time to charge or may not be able to charge when the temperature of the battery is extremely high or extremely low. ≥ Noise may be generated in
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 13
    battery. Securely remove the battery from the camera. (Minute current is consumed even if the camera is turned off when the battery is left attached) The battery . Users are light unit are not supported by this unit footage to verify that both pictures and sound are being recorded normally. ≥ Panasonic
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 14
    measure such as restricting the access with user authentication, etc. ≥ Do not install Panasonic if above operations are not possible due to malfunction. ≥ (For the X2000 ) When requesting a repair for the handle unit, request a repair for the video camera as well, as the cause of the problem
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 15
    2020. These may be subject to change. Battery pack (l 28) AG-VBR59 ∫ For the X2000 The following accessories are also supplied. Handle unit accessories are lost, customers can visit us at http://shop.panasonic.com/support for further information about obtaining replacement parts. @ NOTE ≥
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 16
    VW-VBD58 AG-VBR59 VW-LED1PP VW-HU1 Battery charger Battery pack Battery pack LED video light Handle unit * Handle unit ( X2000 supplied, X1500 optional (VW-HU1)) required. (For U.S.A. only) To order optional accessories please visit http://shop.panasonic.com or your local Photo Specialty Dealer
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 17
    . 1. 2020 1 Set the year, month, date, and time. The year can be set between 2018 and 2037. 2 Select [SET]. Once the setting is complete, the camera image screen is displayed. @ NOTE 0 This can also be set with the [OTHERS] menu → [CLOCK] → [CLOCK SETTING]. - 17 -
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 18
    UHD and FHD recording) ≥ AVCHD recording ≥ Simultaneous recording ≥ Relay recording ≥ Interval recording ≥ Background recording ≥ Pre-recording Linking to external devices Connecting to TV/monitor Connect to a TV/monitor and output images. ≥ When using X2000 . ≥ The unit supports USB2.0.  
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 19
    and stopping streaming (when the function is assigned to the USER button) The unit supports the multi camera function, with which a camera selected from up to 8 cameras is remotely controlled from a single device. For details about operation of the HC ROP app, refer to the online help for the app
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 20
    Chapter 2 Description of Parts This chapter describes the names, functions, and operations of parts on the unit.
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 21
    (l 50, 138) Switches enable/disable of the optical image stabilizer function. This is also used as the USER button (USER3). 16 button (l 146) Press the button to switch between the camera image screen and the thumbnail screen. 17 button (l 165) Switches display/hide of
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 22
    setting. 30 Multidial (l 143) Moves, selects, and sets the menu while the menu is displayed. Use the multidial to also operate thumbnails, select the multi manual function and select/set the various operation icons. 31 32 33 37 38 39 34 35 36 40 31 Fan inlet Fan inlet for cooling
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 23
    . 47 terminal (l 169) A terminal to output video signal by connecting a monitor, etc. X2000 46 51 47 48 49 50 48 Headphones terminal Connects audio monitoring headphones. 49 Charging lamp (l 29) Illuminates when the battery is charging. 50 terminal (l 29) Connects the supplied AC
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 24
    Chapter 2 Description of Parts - Handle unit ([X2000] supplied, [X1500] optional: VW-HU1) Handle unit ([X2000] supplied, [X1500] optional: VW-HU1)  for audio channel 1 is adjusted. : Adjusted automatically. : Adjusted manually with the dial. 15 dial
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 25
    19 20 21 22 23 26 25 24 17 Light cover ≥ Keep the Light cover out of reach of children to prevent swallowing. 18 Built-in LED light (l 120) 19 Tally lamp (l 55) Illuminates when the recording is started. Flashes when the battery level becomes low. Whether or not to illuminate the lamp can be
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 26
    Basic operation Chapter 2 Description of Parts - Basic operation Multidial operation Operate the multidial on the main unit by turning it in vertical direction or pushing it. ≥ Turning the multidial in vertical direction will move the cursor. ≥ Pressing the multidial will select or confirm the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 27
    Chapter 3 Preparation Before you use the unit, attach the battery following the procedures in this chapter. The attaching of accessories is also described in this chapter.
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 28
    and  slide forward to attach. Press in the battery until it clicks and gets locked. A Battery mounting section Removing the battery Be sure to hold down the power button until the status indicator goes off. Then remove the battery while supporting the unit to prevent it from dropping. B Status
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 29
    As the charging lamp lights up green, charging Panasonic batteries (l 28). 0 If you use other batteries battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. 0 Do not expose to low air pressure at high altitudes. 0 Do not expose to extremely low
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 30
    Approx. 5 h 40 min Approx. 5 h 15 min Approx. 5 h 35 min X2000 Approx. 4 h 35 min Approx. 4 h 50 min Approx. 4 h 30 low temperature. ∫ Batteries that support quick charging For quick charging of a battery (AG-VBR59: supplied/optional), use a battery charger (AG-BRD50: optional). @ NOTE 0 Battery
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 31
    Attaching accessories Chapter 3 Preparation - Attaching accessories Adjusting the grip belt ≥ Adjust the grip belt so that it fits the size of your hand. ≥ If the buckle is difficult to tighten, move the pad backward and tighten the buckle again. 4  31  2  A Button B Buckle C Pad 1 Undo
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 32
    Chapter 3 Preparation - Attaching accessories Opening and closing the lens cover Use the lens cover switching lever to open and close the lens cover. Open the lens cover when shooting. When not using the unit, close the lens cover in order to protect the lens. @ NOTE 0 Do not press the lens cover
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 33
    Chapter 3 Preparation - Attaching accessories Attaching the handle unit ([X2000] supplied, [X1500] optional) ¥ Press the power button to the handle unit mounting section on the camera. Match the positions of mounting mark A on the handle unit and mounting mark B on the camera when pushing in.   
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 34
    Chapter 3 Preparation - Attaching accessories 5 While pressing the handle unit mounting screw down, turn it in the direction indicated by arrow 2 until it stops.   ∫ How to remove Remove by doing the steps for attaching in reverse. @ NOTE 0 Keep the microphone holder mounting screws out of
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 35
    - Attaching accessories Attaching the external microphone ∫ Attaching an external microphone to the / terminals When the handle unit ( X2000 supplied, X1500 optional) is attached to the unit, you can attach an external microphone such as a unidirectional microphone AG-MC200G
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 36
    1 Attach the external microphone to the accessory shoe A.  ≥ For details about how to attach the external microphone, refer to the operating instructions for the external microphone. 2 Connect the microphone cable to the terminal. Attaching a tripod The tripod mounting holes accept 1/4-20
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 37
    press the power button to turn on the unit.  A The status indicator lights on. ∫ To turn off the unit Hold down the power button until the 17) Set the time zone, date, and time. 0 The built-in battery (rechargeable battery) will discharge. The setting for date/time may be initialized when the unit
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 38
    Chapter 3 Preparation - Setting the date/time of the internal clock Setting the date/time of the internal clock The date/time/time zone are recorded as meta data in the clip while shooting. This will affect the management of recorded clips, so always check and set the date/time and time zone before
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 39
    the memory card Memory cards supported by the unit (As of January 2020) Type of the memory card SDHC memory card SDXC memory card 4 GB to 32 GB 48 GB to 128 GB Recording capacity ≥ Operation is not guaranteed for any memory cards other than the above. ≥ Panasonic memory cards are recommended
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 40
    memory card Error No remaining recording capacity Write-protected Recording not possible Off No memory card inserted Illegal format Card not supported During card reader mode Memory card status Both loading/writing are permitted. Current recording target. Both loading/writing are permitted
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 41
    Chapter 3 Preparation - Preparing the memory card Inserting/removing the memory card Inserting the memory card The memory card to use with the unit should always be formatted on the unit. (l 41) ≥ Formatting the memory card will erase all of the recorded data which cannot be restored.      
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 42
    recordable times for continuous recording. ≥ If recording for long periods, prepare batteries for 3 or 4 times the period you wish to record for. (l with the different file formats. When the file format is MOV Recording format UHD FHD Recording rate 200 Mbps 150 Mbps 100 Mbps 200 Mbps 100 Mbps 50
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 43
    Chapter 3 Preparation - Preparing the memory card When the file format is MP4 Recording format UHD FHD Recording rate 100 Mbps 72 Mbps 50 Mbps 64 GB Approx. 1 h 20 min Approx. 1 h 50 min Approx. 2 h 40 min Recording capacity 128 GB Approx. 2 h
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 44
    (3840×2160), 29.97p MOV (audio: LPCM) 3 Video data in MOV format: FHD (1920×1080), 59.94i MOV (audio: LPCM) 4 Video data in MP4 format: UHD (3840×2160), 29.97p MP4 (audio: AAC) 5 Video data in MP4 format: FHD (1920×1080), 59.94p MP4 (audio: AAC) 6 Management file 1 7 Management file 2 8 Thumbnail
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 45
    the file name is as follows. B 0 0 2 C 0 1 0 _ 2 0 0 9 1 8 _ E 1 2 5 .MOV 1 2 3 4 5 6 1 CAM INDEX One character from upper case A to Z. ≥ An INDEX assigned to each camera. Set with the [RECORDING] menu → [CLIP NAME] → [CAM INDEX]. 2 CARD number 001 to 999 ≥ This is the number assigned to
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 46
    Chapter 3 Preparation - Preparing the memory card About the number of clips that can be recorded to a memory card MOV MP4 AVCHD File format Number of clips Approx. 4000 ≥ The total number of clips for MOV and MP4. Approx. 3900 ≥ When multiple file formats are recorded to a single memory card,
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 47
    is reset if the built-in battery is exhausted. @ NOTE 0 Switch the display on the camera image screen by either pressing the USER button assigned to [COUNTER] or touching the USER button icon. User bits settings Set the user bits to be recorded. 1 Select the user bits to record in the [RECORDING
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 48
    frame rate, image pull-down, time code, and user bits is as follows.     A Verification information on the right-hand 6 digits B Fixed values C Frame rate D Camera video mode E REC mark ∫ Camera video mode The display of the camera video mode differs depending on the setting of following
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 49
    The operation of the time code generator will continue by the backup mechanism functioning even when replacing the battery. The time code of the free run may shift when any item in the [SYSTEM] menu → at 1× speed starting at the same time as recording. * Available for use when using X2000 - 49 -
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 50
    icon screen is displayed. 1 Select the function to assign to each in the [CAMERA] menu → [USER SW] → [USER1] to [USER12]. ∫ Functions assigned to the USER buttons in the factory setting USER button/USER button icon button button button button button [USER6
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 51
    can also be set from the following menus: USER button functions [DRS] [AE LEVEL] [O.I.S.] [i.ZOOM] [IR REC] [PRE REC] Menu settings [SCENE FILE] menu → [DRS] [SCENE FILE] menu → [AE LEVEL] [CAMERA] menu → [SW MODE] → [O.I.S.] [CAMERA] menu → [SW MODE] → [i.ZOOM] [CAMERA] menu → [SW MODE] → [IR REC
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 52
    SETUP FILE(SD CARD)] → [LOAD] [VIDEO OUT/LCD/VF] menu → [LCD] → [BACK LIGHT] [OTHERS] menu → [USB DEVICE] → [CARD READER MODE] [NETWORK] menu → [STREAMING] → [START] [CAMERA] menu → [SW MODE] → [REAR RING] Checking the function assigned to the USER buttons You can check the function assigned to the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 53
    LCD monitor do not affect the images output or recorded by the camera. ∫ Adjusting the backlight luminance The following operations switch the luminance [LCD] → [BACK LIGHT]. ≥ Each time you either press the USER button assigned to [LCD BACKLIGHT] or touch the USER button icon, the brightness
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 54
    red. j [BLUE TINT]: Adjusts the strength of blue. The adjustments for the viewfinder do not affect the images output or recorded by the camera. ∫ Switching between color and monochrome The viewfinder screen can switch between a color display and monochrome display. Set the display with the [VIDEO
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 55
    Chapter 3 Preparation - Tally lamp When the handle unit ( X2000 supplied, X1500 optional) is attached to the unit, the following status. j When the remaining recording capacity of the memory card or the remaining battery level is low (one time per second) j When the memory card has no more space to
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 56
    Chapter 4 Operation This chapter describes how to operate the screen of this unit, how to operate the menu, the structure of the menu, and details of the menu.
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 57
    to "Thumbnail operation". (l 146) ∫ button Press while the camera image screen is displayed to switch display/hide of most of the items. Press the button for 1 second or more while displaying the camera image screen to display the STATUS screen of the mode check. Each
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 58
    image screen is displayed automatically after 5 seconds without any operation of the multidial or touch operation in the operation icon screen. 0 The camera image screen is automatically displayed after 5 seconds without operation of the button in each screen of the mode check. The
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 59
    image screen Displays the shooting screen. For details about the camera image screen, refer to "Screen status display". (l 159) Thumbnail screen Playback, copy, delete, or protect of a clip can be performed. For details about the thumbnail
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 60
    Sets the setting regarding scene file. This menu sets the detailed image quality adjustment of the camera video. Also, selection of the scene file, writing the scene file data to the the settings for writing/loading/initializing user files to the internal memory, and the basic unit settings. - 60
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 61
    Chapter 4 Operation - Basic operation of the menu Displaying the menu Displays the menu, and select the menu or item to set. 1 Press the button. The menu is displayed. 1 2 3 4 5  1 [`]/[{] Switches the page or changes the value when selected. These button icons are not available if they
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 62
    on the menu. ≥ Perform the similar operation if there is next level. ≥ In some menus, a screen to set the numeric value is displayed in the camera image screen (Fig. 2). ≥ In some menus, a message is displayed if a menu cannot be executed. ≥ Press the button to return to one level higher
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 63
    the menu. ≥ Perform the similar operation if there is next level. ≥ In some menus, a screen to set the numeric value is displayed in the camera image screen (Fig. 2). To change the numeric value, touch [`]/[{] and change the setting value. ≥ In some menus, a message is displayed if a menu cannot be
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 64
    the thumbnail screen is displayed. [PLAYBACK] Sets the playback of recorded clips. [ALL SLOT] will always be selected when you switch from the camera image screen to the thumbnail screen. [CLIP SEL] Selects a clip to be displayed on the thumbnail screen. [ALL SLOT] Displays the clips recorded
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 65
    optical image stabilizer function. If [O.I.S.] is assigned to the USER button, pressing the USER button switches [ON]/[OFF]. For details about optical image setting for a good balance of correction for large and small camera shake. Specifies a setting appropriate for shooting that uses a lot of panning
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 66
    you can zoom to a maximum of approximately 48× (32× when recording with UHD) while maintaining the beauty of highdefinition image quality. [ON] [OFF] Enables You can also either press the USER button assigned to [REAR RING] or touch the USER button icon to switch the setting of the rear ring operation.
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 67
    to assign to the to buttons or the [USER6] to [USER12] button icons. For details, refer to "Assigning function to the USER buttons". (l 50) Following functions can be assigned to [USER1] to [USER12]. ≥ [INHIBIT], [AWB], [DRS], [FBC], [ONE PUSH AF], [S.GAIN], [AREA], [ATW], [ATW LOCK
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 68
    [SCENE FILE] menu Sets the detailed image quality adjustment of the camera video. This menu cannot be set when the thumbnail screen is displayed to standard recording Settings suited to recording with consideration for fluorescent lighting (indoors, etc.) Settings suited to recordings where there is
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 69
    Chapter 4 Operation - Menu settings [NAME EDIT] Edits the name of the scene file selected in the scene file menu. (Maximum 8 characters) ≥ Refer to page 101 for setting procedures. [LOAD/SAVE/INITIALIZE] Loads/saves/initializes the setting values of the scene file assigned to the current scene
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 70
    NORMAL1]. Displays the color suitable for shooting indoors under fluorescent light. Displays the color suitable for shooting cinematic video. Expresses colors in a picture tone similar to that produced with a digital still camera. [COLOR CORRECTION] Sets the saturation and phase for colors. Each of
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 71
    Chapter 4 Operation - Menu settings [B-B-Cy] [SAT] Corrects the color saturation between blue and the color which is intermediate between blue and cyan. [PHASE] Corrects the hue between blue and the color which is intermediate between blue and cyan. The items that can be set are as follows. ≥
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 72
    a digital still camera image tone. [ Low setting (Compression starts at approx. 80%.) Medium setting (Compression starts at approx. 90%.) High setting (Compression starts at approx. 100%.) [DRS] Switches enable/disable of the dynamic range stretcher function. If functions are assigned to the USER
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 73
    , [ON]/[OFF] can be switched using the USER button operations. The items that can be set are as follows. ≥ [ON], [OFF] @ NOTE 0 In the following cases, this cannot be set. j When all of iris, gain, and shutter speed are set to manual in the manual mode j When IR recording is enabled [AE LEVEL
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 74
    X2000 supplied, X1500 optional) has not been attached to the unit. [CH1 LEVEL] Sets if the recording level adjustment method for audio channel 1 is to be automatic or manual the method to adjust the audio input level for audio channel 2 is manual. The items that can be set are as follows. ≥ [ON],
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 75
    BATTERY END] Sets whether to sound the alarm when the remaining battery level is exhausted. The items that can be set are as follows. ≥ [HIGH], [LOW be set, refer to "Format that can be output from the terminal [X2000]". ( l 157) [SDI AUDIO GAIN CHG] Adjusts the gain for the audio signal
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 76
    Chapter 4 Operation - Menu settings [SDI REC REMOTE] Sets if the recording operation against the external equipment connected to the terminal (such as recorder) is to be controlled or not. [ON] Controls the recording operation of the external equipment. [OFF] Does not control the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 77
    Factory setting: [0]) [CONTRAST] Adjusts the contrast of the LCD monitor. The items that can be set are as follows. ≥ [j15]...[i15] (Factory setting: [0]) [BACK LIGHT] Adjusts the brightness of the LCD monitor backlight. [0] is the standard brightness. The items that can be set are as follows. ≥ [j1
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 78
    ] Switches display/hide of the wireless LAN connection status. The items that can be set are as follows. ≥ [ON], [OFF] (Factory setting: [ON]) [BATTERY REMAIN] Switches display/hide of the power status. The items that can be set are as follows. ≥ [ON], [OFF] (Factory setting: [ON]) [REC FORMAT
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 79
    recording start and recording stop on the external equipment connected to the terminal* and the terminal. * Available for use when using X2000 . The items that can be set are as follows. ≥ [ON], [OFF] (Factory setting: [ON]) [REC MODE] Switches display/hide of the status of interval
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 80
    multi manual function. The items that can be set are as follows. ≥ [ON], [OFF] (Factory setting: [ON]) [D.ZOOM] Switches display/hide of digital zoom ratio. The items that can be set are as follows. ≥ [ON], [OFF] (Factory setting: [ON]) [IR REC] Switches display/hide of the settings in the [CAMERA
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 81
    SW] Sets how focus assist is set when the [FOCUS ASSIST] in the USER button is set. [EXPAND] [PEAKING] [EXPAND&PEAKING] Sets the enlarged display of the peaking display. The items that can be set are as follows. ≥ [LOW], [MID], [HIGH] (Factory setting: [MID]) [PEAKING COLOR] Sets the color
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 82
    (Factory setting: [LOW]) [EI ASSIST] [ZEBRA] Sets whether to superimpose the zebra signal to the output. [MOMENT] [ON] [OFF] Press the USER button to which [ZEBRA] is assigned or touch the USER button icon to superimpose the zebra signal for approximately 5 seconds. Always superimposes the zebra
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 83
    are as follows. ≥ [ON], [OFF] (Factory setting: [ON]) [LEVEL GAUGE RESET] Sets the horizontal and vertical reference value set by [LEVEL GAUGE SET] in the USER button to the factory setting. The items that can be selected are as follows. ≥ [YES], [NO] [RECORDING] menu Sets the various items in the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 84
    ] is set) (Factory setting: [00]) (each item) ≥ "h" is an abbreviation for hour, "m" for minute, "s" for second and "f" for frame. [UB PRESET] Sets user bits. Enabled only when [USER] is selected in [UB MODE] of [TC/UB]. Each digit can be set in following range. ≥ [00]...[FF] (Factory setting: [00
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 85
    - Menu settings [UB MODE] Selects the user bits mode. User bits information is recorded in the clip. [FRAME RATE] [USER] [TIME] [DATE] [TC] [CLIP NAME] (Factory setting: [USER]) Selects the image information (such as frame rate) of the camera. Selects the user bits set in [UB PRESET]. Selects the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 86
    HC ROP app). [ENABLE/DISABLE] Sets whether to enable the IP remote function. The items that can be set are as follows. ≥ [ENABLE], [DISABLE] (Factory setting: [DISABLE]) [USER ACCOUNT] Registers a new user 0 Cannot be set when [REC FORMAT] is set to UHD. Items that can be set [1920×1080-60fps 24M],
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 87
    . The items that can be set are as follows. ≥ [CAMERA], [RECEIVER], [RECEIVER(MULTICAST)] (Factory setting: [RECEIVER]) [CONNECTION Connects to the wireless access point. Wireless access point is entered manually. [SSID] Enters or displays the network name of this unit : [HC-X2000], etc.) - 87 -
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 88
    [CH1], [CH6], [CH11] (Factory setting: [AUTO]) [ENCRYPTION] Sets the encryption method when the [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [INFRA(SELECT)]/[INFRA(MANUAL)] is selected. The items that can be set are as follows. ≥ [WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE] (Factory setting
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 89
    Chapter 4 Operation - Menu settings [UTILITY] Performs the various operations related to the network function. [NETWORK INITIALIZE] Returns the various networks settings to the factory default state and restarts the unit. [SYSTEM] menu Configure the settings regarding the recording format of video
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 90
    [1080-25.00p/422LongGOP 50M] j When using the face detection/tracking AE&AF function [OTHERS] menu Configures the settings for writing/loading/initializing user files to the internal memory and other settings of the unit. [FILE] Saves and loads the setting data. For the saving and loading target
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 91
    external drive recognized by a computer. The items that can be selected are as follows. ≥ [YES], [NO] @ NOTE 0 When switched to service mode while using a battery, the LCD monitor turns off after approximately 5 seconds. The LCD monitor turns on when you perform the following operations: j Turn the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 92
    accessed (during recording, during playback, while formatting the media, etc.) j During pre-recording j In card reader mode 0 In the following case, even if [BATTERY] is set to [ON], the power will not automatically turn off. j When using the AC adaptor* 0 In the following cases, the power will not
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 93
    Chapter 4 Operation - Factory setting value of the scene file Factory setting value of the scene file [SCENE FILE] menu The factory settings of the [SCENE FILE] menu and the items that can be selected differ depending on the [SCENE FILE] menu → [FILE SELECT] setting. Item [F1:] [MASTER DTL]
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 94
    . j -: Not a target. *1 Available for setting when using X2000 . [THUMBNAIL] menu [PLAYBACK] [CLIP] [DISPLAY] Item [CLIP SEL] [RESUME PLAY] [PROTECT] [DELETE] [COPY] [INFORMATION] [DATA] [CAMERA] menu SCENE SETUP - l - - - - l [SW MODE] [USER SW] Item [ZOOM RING] [IRIS RING] [SUPER GAIN
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 95
    Chapter 4 Operation - Target items for scene file/setup file/initialization [SCENE FILE] menu Item [NAME EDIT] [LOAD/SAVE/INITIALIZE] [MASTER DTL] [DTL CORING] [V.DTL LEVEL] [RB GAIN CONTROL SETTING] [R GAIN AWB A] [B GAIN AWB A] [R GAIN AWB B] [B GAIN AWB B] [AWB A GAIN OFFSET] [AWB B
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 96
    LOWCUT] [CH2 MIC LOWCUT] [CH1 LIMITER] [CH2 LIMITER] [MIC LIMITER LINK] [AUDIO OUT] [BATTERY END] [MEDIA END] [WARNING] [VIDEO OUT/LCD/VF] menu SCENE SETUP l l l l OUT ZEBRA] [BRIGHTNESS] [COLOR LEVEL] [CONTRAST] [BACK LIGHT] [RED TINT] [BLUE TINT] [SELF SHOOT] [BRIGHTNESS] [COLOR LEVEL]
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 97
    [FULL AUTO] [SLOT1/2 STATUS] [2 SLOTS FUNC.] [STREAMING] [NETWORK] [BATTERY REMAIN] [REC FORMAT] [FRAME RATE] [CLIP NAME] [REC REMOTE] [REC [AE LEVEL] [ZOOM/FOCUS] [WHITE BALANCE] [FACE DETECTION] [DATE/TIME] [MULTI MANUAL] [D.ZOOM] [IR REC] [PLAYBACK STATUS] [CENTER MARKER] [SAFETY MARKER] [FRAME
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 98
    l l l [DEVICE SEL] [NETWORK FUNC] [IP REMOTE] [STREAMING] [WLAN PROPERTY] [WLAN IPv4 SETTING] [INFORMATION] [UTILITY] Item [ENABLE/DISABLE] [USER ACCOUNT] [ACCOUNT LIST] [STREAMING FORMAT] [START TRIGGER] [CONNECTION INFO.] [RECEIVER URL] [RTSP PORT] [MULTICAST ADDRESS] [MULTICAST PORT] [LOAD (SD
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 99
    SETTING] [TIME ZONE] [DATE FORMAT] [USB DEVICE] [CARD READER MODE] [SERVICE MODE] [INFORMATION] [VERSION] [OPERATION TIME] [UPDATE] [ECO MODE] [BATTERY] [AC] [NETWORK] [APPROVED REGULATION] [LANGUAGE] [MENU INITIALIZE] SCENE SETUP - - - l l - - l - - - - - l l l - l - INITIALIZE
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 100
    Handling setting data Chapter 4 Operation - Handling setting data Scene files File structure of the setting data The scene files of [F1:] to [F6:] can be saved in the main unit memory in accordance to the scene file number. What can be saved as a scene file is the setting contents of the [SCENE
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 101
    Chapter 4 Operation - Handling setting data 3 Select [Enter]. A confirmation screen is displayed. 4 Select [SET]. The file is saved. ≥ An error message may be displayed. For details about the error message, refer to "Cases indicated by error messages". (l 188) ∫ Saving the scene file by overwriting
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 102
    displayed. ≥ You can also either press the USER button assigned to [LOAD SETUP FILE] or touch the USER button icon to display the list of setup files Cases indicated by error messages". (l 188) ≥ The file saved by a camera with different firmware version may not be able to load. Loading setup files
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 103
    Chapter 5 Shooting This chapter describes the basic procedure for recording. This chapter also describes the special recording method.
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 104
    the handle) and tally lamp, attach the handle unit ( X2000 supplied, X1500 optional) to the unit.    ) @ NOTE 0 The settings made in manual mode are not maintained for the following settings set with the [CAMERA] menu → [SW MODE] → [REAR RING] → [IRIS] ≥ The following USER button functions are
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 105
    be recorded to j When switched to [CARD READER MODE] or [SERVICE MODE] j When the [RECORDING] menu → [2 SLOTS FUNC.] → SLOTS FUNC.] ≥ Refer to page 50 for USER button settings. Selecting the resolution, codec, set with this unit are as follows: j 2160: UHD (3840×2610), 1080: FHD (1920×1080), 720:
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 106
    Codec LPCM Number of channels 2ch 24 bits Number of quantizing bits Sampling frequency 48 kHz When [FILE FORMAT] is set to [MP4] ∫ Video Resolution UHD (3840×2160) FHD (1920×1080) ∫ Audio [FREQUENCY] [59.94Hz] [50.00Hz] [59.94Hz] [50.00Hz] [REC FORMAT] [2160-59.94p/HEVC LongGOP 100M] [2160
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 107
    Sampling frequency 48 kHz @ NOTE ¥ For the recordable times when using a battery, refer to "Standard charging time and recordable time" (l 30). 0 [ to [2160-59.94p/HEVC LongGOP 200M] at the time of purchase. 0 For a guide to recording times, refer to "Recording time of the memory card" (l 42). 0
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 108
    CLOSE darken the image. ≥ Value closer to OPEN brighten the image. Setting with the multi manual function 1 Select the [CAMERA] menu → [SW MODE] → [REAR RING] → [ZOOM]. 2 Press the button to switch to manual iris mode. The iris display is highlighted in orange. 3 Turn the multidial to adjust
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 109
    manual gain mode. B GAIN 1 Switch to manual mode with the switch. (l 104) 2 Press the button to switch to manual CAMERA] menu → [SW MODE] → [SUPER GAIN], select one of [SUPER GAIN], [SUPER GAINi], or [ALL]. 2 Either press the USER button assigned to [S.GAIN] or touch the USER
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 110
    rear ring is turned. Setting with the multi manual function 1 Select the [SCENE FILE] menu → [AE LEVEL] → [ON]. 2 Select the [CAMERA] menu → [SW MODE] → [REAR . Applications for the USER button You can also either press the USER button assigned to [AE LEVEL] or touch the USER button icon to switch
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 111
    is a flicker, select a shutter speed that is appropriate to the light. 0 If you set the unit to auto focus mode at times other USER button, or touch the USER button icon, auto focus mode is turned on and automatic focusing occurs at high speed until the camera focuses. ≥ The camera returns to manual
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 112
    extremely bright subjects are recorded or when recording is performed inside under lights, there may be changes in the color hue and brightness of the possible for the camera to keep up with changes in the images. If this occurs, set the iris, focus, and white balance manually. Area mode function
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 113
    area mode function The function set in the [CAMERA] menu → [SW MODE] → [AREA MODE] can be used by performing the following operation when shooting or while in shooting standby. 1 Either press the USER button assigned to [AREA] or touch the USER button icon. (l 50) ≥ The area frame A is displayed
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 114
    balance [Ach] 1 Switch to manual mode with the switch light source for the subject, and zoom in on the white pattern so that the white color appears in the screen. 6 Adjust the iris (the lens stop). Adjust the iris so that the brightness of Y GET is approx. 70%. 7 Either press the USER
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 115
    . Error message [AWB NG ] [AWB NG ] [AWB NG ] or [AWB NG ] Meaning There is insufficient light. There is too much light. The color temperature is too high, or too low. Remedy Increase the amount of light or increase gain. Decrease the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 116
    CAMERA] menu → [SW MODE] → [W.BAL VAR], set the color temperature. This can be set from [2000K] to [15000K]. ∫ Setting with the multi manual function 1 Press the button to switch to "Preset". 2 Either press the USER of images according to the lighting conditions. The auto tracking white
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 117
    ≥ When super gain is set with the USER button ≥ When changing the gain values ≥ When for adjusting the white balance. 1 Switch to manual mode with the switch. (l lighting conditions have changed. 0 During black balance adjustment, the aperture is set to automatically shut out light
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 118
    ): When the handle unit ( X2000 supplied, X1500 optional) is attached to the unit ≥ Rear ring on the lens: When [CAMERA] menu → [SW MODE] UHD) while maintaining the beauty of highdefinition image quality. 1 Select the [CAMERA] menu → [SW MODE] → [i.ZOOM] → [ON]. ≥ You can set [i.ZOOM] in a USER
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 119
    button, you can use fast zoom by operating the zoom lever (on the grip). 1 Select the [CAMERA] menu → [USER SW] → [USER1] to [USER12] → [FAST ZOOM]. 2 Either press the USER button assigned to [FAST ZOOM] or touch the USER button icon. 3 Push the zoom lever (on the grip) until the end to zoom. ≥ The
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 120
    auto tracking white balance function may not work correctly. Adjust the white balance. (l 114) 0 When the remaining battery level gets low, the built-in LED light may turn off. It also may not turn on. 0 If you operate the light dimmer dial during recording, operating noise may be recorded. - 120 -
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 121
    . It effectively softens or sharpens images, but in some cases, the whole image may become rough due to emphasized noise and edges. To avoid such problems, it is necessary not to add this effect on parts where emphasizing is not needed and keep the details of the parts. ∫ General settings [MASTER
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 122
    prevent halation in images. ∫ General settings Use the unit with the factory settings. ∫ Advanced settings [KNEE MODE]: Sets the operation mode of knee function ([AUTO]/[LOW]/[MID]/[HIGH]). - 122 -
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 123
    the phenomena of light and dark bands (flash bands) that horizontally divide images recorded in environments where there are flashes from other cameras, and reduces a USER button to use it. For details, refer to "Assigning function to the USER buttons". (l 50) [FBC] is displayed on the camera image
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 124
    ON]. ≥ This can also be set even with the USER button. Refer to "Assigning function to the USER buttons". (l 50) 3 Press the REC button. Super shown in Step 1. 0 Audio cannot be recorded with the super slow recording. 0 The [CAMERA] menu → [SW MODE] → [AF SPEED] is fixed to [NORMAL]. 0 The [
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 125
    Audio input Chapter 5 Shooting - Audio input The unit can record 2 channels of audio. When the handle unit ( X2000 supplied, X1500 optional) is attached to the unit, you can connect audio equipment or an external microphone to the / terminals. The audio to
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 126
    record as is. ¥ When connecting equipment that does not support i48 V power supply, set the / switch 0 Using a phantom microphone shortens the battery time. 0 When noise from unconnected terminals the audio recording level There are manual adjustment and automatic adjustment as the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 127
    to j (When the handle unit has not been attached to the unit) Select [AUDIO] menu → [MIC SETTING] → [CH1 LEVEL]/[CH2 LEVEL] → [MANUAL] Confirming the audio input level The input level of the audio can be confirmed in the camera image screen and the AUDIO screen of the mode check. - 127 -
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 128
    NOTE 0 Adjust the volume of the headphones and built-in speaker as follows. j During recording, volume is adjusted with the [ AUDIO MON] multi manual function. (l 144) j During playback, volume is adjusted with the zoom lever (on the grip). (l 153) Confirming audio input setting The setting for the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 129
    [FILE FORMAT] [REC FORMAT] Approx. 5 seconds [MOV], [MP4] UHD recording format Approx. 10 seconds [MOV], [MP4] FHD recording format [AVCHD status display of the camera image screen. ≥ You can also either press the USER button assigned to [PRE REC] or touch the USER button icon to switch
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 130
    → [SIMUL REC]. [SIMUL] is displayed in the 2 slot function display of the camera image screen. A slanted line is displayed on the [SIMUL] display when simultaneous recording recording is completed, [DEL LAST CLIP] assigned to the USER button will not operate. 0 For the folder name and the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 131
    2 slot function display of the camera image screen. A slanted line is [SYSTEM] menu → [REC FORMAT] is UHD 0 The lighting status of the tally lamp*1 changes according background recording mode, the USER button assigned to [DEL LAST X2000 supplied, X1500 optional) is attached to the unit. *2 When
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 132
    of the camera image screen. [HDMI REC REMOTE] does not work. 0 (For the X2000 ) The [VIDEO OUT/LCD/VF] menu → [SDI CLIP] assigned to the USER button does not work. light source and the scene being recorded, color hue and focus may not be automatically set. In case such as this, try adjusting manually
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 133
    Chapter 5 Shooting - Special recording function IR recording A night time shooting using the IR light can be performed. ∫ Assigning [IR REC] to the USER button 1 Select the [CAMERA] menu → [USER SW] → [USER1] to [USER12] → [IR REC]. Set so enable/disable of the IR recording can be switched with a
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 134
    [ON]. ≥ You can also either press the USER button assigned to [ZEBRA] or touch the USER button icon to display the zebra pattern and switch display pattern cannot be recorded. 0 To record video with less overexposure, manually adjust the shutter speed and brightness (iris/gain) so that the zebra
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 135
    with the switch. (l 104) 2 Press the button to switch to manual focus mode. (l 111) 3 Select [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [FOCUS ASSIST SW] → [EXPAND] or [EXPAND&PEAKING]. 4 Select the [CAMERA] menu → [USER SW] → [USER1] to [USER12] → [FOCUS ASSIST]. - 135 -
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 136
    the button to switch to manual focus mode. (l 111) 3 Select [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [FOCUS ASSIST SW] → [EXPAND] or [EXPAND&PEAKING]. 4 Select the [CAMERA] menu → [USER SW] → [USER1] to [USER12] → [FOCUS ASSIST]. 5 Press the USER button to which [FOCUS ASSIST] is
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 137
    and adjust the [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [DETAIL LEVEL]/[DETAIL FREQ.]. ≥ You can also either press the USER button assigned to [LCD/VF DETAIL] or touch the USER button icon to switch enable/disable of the [DETAIL] menu. @ NOTE 0 In the following cases, the focus assist function is
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 138
    the detected faces are focused on and the exposure is matched. 1 Select the [CAMERA] menu → [USER SW] → [USER1] to [USER12] → [FACE DETECT]. 2 Switch to @ NOTE 0 In the following cases, it cannot be used. j When set to manual mode j When set to digital zoom j When using the area mode function j When
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 139
    ] j When recording with super slow 0 Stabilization may not be possible where camera shake is large. 0 When recording with a tripod, it is recommended to → [ON]. ≥ You can also either press the USER button assigned to [DRS] or touch the USER button icon to switch enable/disable of the dynamic range
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 140
    SHOOT] → [MIRROR]. * When using X2000 , the terminal can be USER button. 1 Select the [CAMERA] menu → [USER SW] → [USER1] to [USER12] → [WFM]. ∫ Displaying the waveform monitor 1 Press the USER button assigned to [WFM] or touch the USER button icon. Press the USER button or touch the USER
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 141
    ZOOM] to the USER button Set so enable/disable of the digital zoom function can be switched with a USER button. 1 Select the [CAMERA] menu → [USER SW] → [ is inclined. The line of the level gauge will change from orange to light blue, and then to white when the inclination of the unit is corrected.
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 142
    the functions assigned to [USER6] through [USER12]. Displaying the operation icon screen 1 Either touch and hold the screen for approximately 2 seconds in the camera recording screen, or press the multidial when [ ICONS] is displayed. ≥ The operation icon screen is displayed. The unit returns to the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 143
    the camera image screen [ ICONS] [ GAIN] [ SHUTTER] [ WB] [ IRIS] [ AE LEVEL] [ AREA] [ AUDIO MON]  C Multi manual function [ AE LEVEL] [ AREA] Set to manual gain mode (l 109) Set to manual shutter mode (l 112) Press the button and the USER button assigned to [AWB] to switch white
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 144
    Chapter 5 Shooting - Multi manual function Displaying the operation icon screen 1 Turn the multidial to display the [ 2 Press the multidial. ICONS]. The operation icon screen is displayed. Adjusting headphone volume
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 145
    Chapter 6 Playback Data including additional information such as image, audio, and meta data that are recorded by single shooting is saved as a clip. Playback, copy, etc., of the clip can be performed on the unit.
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 146
    all the clips recorded on every memory card in each card slot. Displays in [ALL SLOT] when the thumbnail screen is displayed from the camera image screen. [SLOT1]: Displays only the clips recorded on the memory card in card slot 1. [SLOT2]: Displays only the clips recorded on the memory
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 147
    Chapter 6 Playback - Thumbnail operation 6 Power status display : Displays the remaining battery level while powered with the battery. : Displayed when powered with the AC adaptor. 7 Cursor 8 Clip that cannot be played back Displays when the clip cannot be played back in the unit
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 148
    the clip is protected. 4 Thumbnail image 5 Clip name 6 [START TC] Displays the time code value at the start of the recording. 7 [START UB] Displays the user bits value at the start of the recording. 8 [DATE] Displays the date of the recording. 9 [TIME] Displays the time at the start of recording. 10
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 149
    Chapter 6 Playback - Thumbnail operation Copying clip Clips can be copied between memory cards. Only the clip recorded in AVCHD can be copied. 1 Press the button. The thumbnail screen is displayed. 2 Press the button while the thumbnail screen is displayed. The menu is displayed
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 150
    Chapter 6 Playback - Thumbnail operation Deleting clips Deletes the clip. 1 Press the button. The thumbnail screen is displayed. 2 Press the button while the thumbnail screen is displayed. The menu is displayed. 3 Select the [THUMBNAIL] menu → [CLIP] → [DELETE] → [SELECT]. The
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 151
    access lamp is flashing ≥ When the power is turned off by removing the battery or the AC adaptor while recording or performing record completion process Restoring a card in the card slot that is flashing, or do not remove the battery or the AC adaptor when the card 1 access lamp/card 2 access lamp
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 152
    Playing back clips Chapter 6 Playback - Thumbnail operation 0001 0002 0003 00:00:00.00 0004 00:00:16.00 0005 00:00:32.15 0006 00:01:00.17 0007 00:01:24.02 0008 00:01:46.02 0009 00:02:30.20 00:02:53.08 00:03:30.20 1 In the [SYSTEM] menu → [
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 153
    playback may not proceed normally, or may not be possible. (Please check compatibility in the instruction manual of your device.) ≥ Clips recorded with devices other than this unit are not supported by this unit. Adjusting the volume during playback You can adjust the playback volume by operating
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 154
    Chapter 6 Playback - Useful playback function Useful playback function Resume play When the playback of a clip is stopped midway, it will start the playback from the position that stopped the playback when it is played back the next time. 1 Select the [THUMBNAIL] menu → [PLAYBACK] → [RESUME PLAY] →
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 155
    Chapter 6 Playback - Still image recording function Still image recording function One frame of the recorded video can be recorded as a still image. Number of pixels of the still image to be recorded is same as the number of pixels of the recorded video. 1 Select by touching or pressing the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 156
    Chapter 7 Output and Screen Display This chapter describes the screen displayed on the output video and LCD monitor.
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 157
    REC FORMAT]. Format that can be output from the terminal [X2000] The format that can be output from the terminal differs 10 bit * Factory setting @ NOTE 0 The 3840×2160 output is not supported. 0 User bits are not displayed. 0 [OUT FORMAT] restores the factory settings when the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 158
    Chapter 7 Output and Screen Display - Output format Format that can be output from the terminal The format that can be output from the terminal differs with following combination of the settings. ≥ [SYSTEM] menu → [FREQUENCY] ≥ [SYSTEM] menu → [FILE FORMAT] ≥ [SYSTEM] menu → [REC
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 159
    X2000 . *2 The tally lamp is available when the handle unit ( X2000 supplied, X1500 optional) is attached. 1 Time code Each time you press the USER button assigned to [COUNTER] or touch the USER lamp is instructed to illuminate in red via network.*2 ≥ : The tally lamp is instructed to illuminate
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 160
    terminal. ≥ [ SDI]*1: Recording instruction is output to the output from the terminal. ≥ [SDI]*1: Pause instruction is output to the output from battery level while powered with the battery. (The battery status display will change as → → → → → while the remaining battery level
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 161
    STD]: Standard auto iris control ≥ [SPOT]: Auto iris control for spot light ≥ [BACK]: Auto iris control for the backlight compensation 22 AE level 29 Message display area Displays messages, such as the status of the camera and warnings. Displays the warning status of the unit in the STATUS
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 162
    set to [mm/feet]. Displays in meter unit when set to [mm/m]. ≥ [AF]: Displayed when set to auto focus mode. ≥ [MF]: Displayed when set to manual focus mode. 45 Audio monitor volume adjustment Displayed when the zoom lever (on the grip) or the multidial is used to adjust the volume of
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 163
    Screen status display Screen display during playback 1 2 3 TCR 12:59:59:23 A001C001 6 4 CH1 CH2 5 1 Time code display Each time you press the USER button assigned to [COUNTER], the display changes in the order [TCR UBR CLIP no display. 2 Clip name Displays the name of the clip being
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 164
    button while the camera image screen is displayed to hide most of the items. recording capacity of the memory card or remaining battery level gets low. *3 The display position differs in the in an IP connection 36 Multi manual function 37 Color temperature 38 Optical image
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 165
    button while each screen is displayed to return to the camera image screen. @ NOTE 0 The mode check screen of the recording media. *1 Displayed when using X2000 . [SDI OUT]*1 [HDMI OUT] [CARD not inserted. ≥ [UNSUPPORTED]: Memory card is not supported. ≥ [FORMAT ERROR]: Memory card cannot be used
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 166
    with [ATTACHED]/[DETACHED] whether the handle unit ( X2000 supplied, X1500 optional) is attached. Displays the low-cut filter for each channel with [ON]/[OFF]. Enlarges the display of the audio level meter displayed on the camera assigned to the USER switch, super gain, and white balance. [USER SW] [
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 167
    Chapter 8 Connecting to External Devices This chapter describes the external devices that can be connected to the unit.
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 168
    Chapter 8 Connecting to External Devices - Connecting with headphones and TV/monitor Connecting with headphones and TV/monitor Headphones Headphones (commercially-available) can be connected to the headphone terminal (3.5 mm (0.14q) diameter stereo mini jack).  A Headphone terminal @ NOTE 0 Audio
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 169
    UHD (3840×2160), you can enjoy the finely detailed video provided by 4K videos. If the TV/monitor is not compatible with 4K . 0 VIERA Link is not supported on the unit. Note that the ). 0 (For the X2000 ) Use a commercially- to a TV/monitor while displaying the camera image screen, there may be some
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 170
    . ≥ When using the battery, the LCD monitor turns camera shooting status in approximately 5 seconds. @ NOTE 0 You can also either press the USER button assigned to [CARD READER MODE] or touch the USER 0 The LCD monitor lights up by touching the you are using may not support the memory card. 0
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 171
    "HC-X2000 battery and/or AC adaptor, wait approximately 1 minute again, and then turn the unit back on. (Data may be destroyed when above operation is performed while accessing the memory card.) Operating environment (mass storage) ≥ Even if the system requirements mentioned in this owner's manual
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 172
    wireless LAN devices via a network. Some of the functions can be remotely operated by connecting the unit with iPhone/iPad or Android terminal with the HC ROP app installed. (l 178) - 172 -
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 173
    Chapter 9 Network Connection This chapter describes how to use the unit by connecting to a network.
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 174
    are available. ≥ Connecting to HC ROP app ≥ Streaming function About this unit is sold, and Panasonic takes no responsibility for any violations Android handset, refer to the operating instructions for your device. ∫ This unit wireless LAN device. 0 When the battery indicator ( ) is flashing red,
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 175
    HC-X2000], etc.) When the password confirmation screen appears, enter the password (encryption key). For details, refer to the operating instruction screen termination may take some time due to the restart of the network service after the setting is changed. 0 Some of the items not included in
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 176
    PROPERTY] and [WLAN IPv4 SETTING] when set to either [INFRA(SELECT)] or [INFRA(MANUAL)]" (l 176). 4 In [NETWORK] menu → [WLAN PROPERTY] and [WLAN IPv4 due to the restart of the network service after the setting is changed. 0 ENCRYPTION in WEP is not supported. 0 Some items cannot be set depending
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 177
    be disabled when [DHCP] is set to [CLIENT]. 0 Depending on the network environment, even if [DHCP] is set to [CLIENT], entry of the DNS value manually may be required. When invalid DNS value is entered in any other cases, the automatic assignment by DHCP will not operate properly. Confirming the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 178
    the network settings Specify the network settings. (l 175) Setting the user account name and the password Set the user account and password for entry into the HC ROP app. 1 Select the [NETWORK] menu → [IP REMOTE] → [USER ACCOUNT]. 2 Enter the user account name and select [Enter]. ≥ Enter the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 179
    . @ NOTE 0 For information such as the supported OS of the HC ROP app, refer to the App Store or the Google Play Store download page. Connecting to the HC ROP app Connect to the unit following the HC ROP app guide. @ NOTE 0 The unit cannot connect with the HC ROP app while the menu or thumbnail
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 180
    ] is set j The menu has been set according to "Settings when using the streaming function" (l 180) (This cannot be used when set to UHD) j Interval recording and background recording are disabled ∫ Settings when using the streaming function [FREQUENCY] [59.94Hz] [SYSTEM] menu [FILE FORMAT] [REC
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 181
    start streaming from the application software, please see the manual for the application software. 0 Streaming stops when performing . Streaming with multicast One streaming can be distributed to multiple receivers via supported router, etc., when the multicast function is used. 1 Select the
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 182
    menu, or use the USER button assigned to [STREAMING START] or the USER button icon. j When CAMERA] 0 Only RTMP and RTMPS are available when starting streaming with an operation from the unit. In such case, IPv6 cannot be used. 0 For settings such as URL, refer to the manual for each streaming service
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 183
    using the setting tool Installing software Download and expand the P2 Network Setting software for Windows from the following website. https://panasonic.jp/support/global/cs/e_cam Creating the SDXC memory card for setting using the P2 Network Setting software The SDXC memory card created with
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 184
    Chapter 10 Notes Maintenance of the unit or frequently asked questions are described.
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 185
    becomes shorter in low temperature. ≥ If the time is short after sufficient charging, the battery life has expired. ∫ Can the battery that was used in the previous models used? ≥ VW-VBD58 (optional) can be used. It is recommended to use the following Panasonic genuine batteries. j AG-VBR59 (supplied
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 186
    trouble focusing under certain conditions. In this case, the manual j Shooting a low contrast subject menu * is displayed in the camera image screen. ∫ Color or under fluorescent light, mercury light or sodium light, etc., not support hot instructions the operating instructions of the device
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 187
    an error message will appear on the computer. ≥ To disconnect the USB cable safely, double-click the icon in the task tray and follow the instructions on the screen. Others ∫ Which lens filters can be attached? ≥ 62 mm (2.44q) diameter filters can be attached. If AVCHD scenes do not change smoothly
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 188
    X2000 supplied, X1500 optional) is attached. Cases indicated by error messages System error Screen display Camera turn off the power. Screen display Camera image screen [LOW BATTERY] [HIGH TEMPERATURE] [FAN STOPPED] recording and playback operations. If the problem persists, consult the dealer. ≥
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 189
    Alert Screen display Camera image screen Description card that is inserted. a recording medium which is not supported has been ≥ Insert the memory card again if displayed BACKUP BATT EMPTY] A drop in the voltage of the backup battery for the internal clock was detected when the power button was
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 190
    Message Screen display Camera image screen Description the management information on the memory card is not supported. ≥ Match the device and content versions. [CANNOT card in the copy destination or delete unnecessary clips. [LOW BATTERY. PLEASE CONNECT It is trying to copy a clip or update
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 191
    Chapter 10 Notes - Warning system Screen display Camera image screen [SCENE FILE LOAD FAILED] [SCENE FILE non-compatible error, 5 minutes has elapsed ≥ Confirm if the OS in use is supported by the unit. until the service mode connection is established. The unit tried to protect or delete a clip on
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 192
    Chapter 10 Notes - Recording function that cannot be used simultaneously Recording function that cannot be used simultaneously Depending on the recording function that is set, there are recording functions that cannot be used simultaneously. ≥ Meaning of the symbols used in the table are as follows
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 193
    website below. (As of January 2020) https://panasonic.jp/support/global/cs/e_cam (This website is in English only.) 0 When updating the firmware, use the AC adaptor or sufficiently charged battery. 0 Do not turn off the power while updating the firmware. Rewriting of the firmware may fail and
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 194
    , and then with a dry cloth. ≥ When using a chemical dust cloth, follow the instructions that came with the cloth. Cautions for storage Remove the battery from the main unit when storing. Store them in a place where humidity is low and temperature is relatively constant. When storing the unit, it is
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 195
    Chapter 11 Specification This chapter describes the specifications of this product.
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 196
    Dimensions Main unit Chapter 11 Specification - Dimensions 93 mm (3.66″) 129 mm (5.08″) When the handle unit is attached ( X2000 supplied, X1500 optional) 257 mm (10.1″) 159 mm (6.26″) 129 mm (5.08″) 257 mm (10.1″) - 196 -
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 197
    (when battery is used) (when the AC adaptor is used) Power consumption 22.9 W (Charging) X1500 14.4 W (When the LCD monitor is used) X2000 15.5 W (When the LCD monitor is used) Item Ambient operating temperature Ambient operating humidity Mass (Weight) External dimensions (W×H×D) Camera Pickup
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 198
    illuminance of subject Digital zoom Built-in LED light (When using the handle unit ( X2000 supplied, X1500 optional)) Lens hood Chapter 11 Mbps)/ 422ALL-I 100M (Average approx. 100 Mbps) ≥ MP4: 4:2:0 (10bit) UHD (3840×2160); HEVC LongGOP 100M (Average approx. 100 Mbps)/ HEVC LongGOP 72M (Average
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 199
    Frame rate Bit rate Audio compression format Supported protocol Wi-Fi Compliance standard Frequency range used compliant 2412 MHz to 2462 MHz [1 to 11ch] Wi-Fi compliant WPA™/WPA2™ Infrastructure mode X1500 X2000 ≥ BNC terminal ×1 0.8 V [p-p], 75 Ω, 3G/1.5G HD-SDI compatible ― ≥ Output format
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 200
    handle unit ( X2000 supplied, X1500 optional)) Audio output Supports stereo microphone ([X2000] supplied, [X1500] optional) Power consumption Maximum approx. 3.1 W (when connected to the camera) Mass 16q×2-1/4q) (excluding the DC cable section) Battery pack (AG-VBR59) Voltage/capacity 7.28 V
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 201
    111 Built-in battery...37 Built-in LED light 120 C Camera image screen 59, 109 Gamma function 122 H Handle unit Attachment...33 HC ROP app ...179 Headphones...168 High-speed shooting ...32 Lens hood ...31 Level gauge ...141 M Manual focus ...111 Matrix function...121 Memory card ...39 Folder
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 202
    Time code ...48 Time data...47 Time stamp function 140 Tripod...36 TV ...169 U Update ...193 Usage restriction 192 USB...170 User bits ...47 USER buttons Assignment ...50 Check ...52 V Viewfinder ...54 W Warning system 188 Waveform monitor function 140 White balance ...114 Wireless LAN Direct
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 203
    or Service Center; buy spare parts and accessories by our Web Site to Latin American: COUNTRY Panama Colombia Ecuador Costa Rica El Salvador Guatemala Uruguay Paraguay Chile WEB SITE www.panasonic.com/pa/soporte/ www.panasonic.com/co/soporte/ www.panasonic.com/ec/soporte/ www.panasonic.com
  • Panasonic HC-X2000 | HC-X1500 Advanced Operating Manual - Page 204
    Panasonic Corporation Web site: http://www.panasonic.com Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 http://shop.panasonic.com Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 www.panasonic.com © Panasonic Corporation 2020
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
Owner’s Manual
4K Video Camera
Model No.
HC
-
X1500
HC
-
X2000
Please read these instructions carefully before using this product, and save this manual for future use.
DVQP2149ZA
F0220SQ0
(U.S. customers only)
If you have any questions, visit :
Canada : www.panasonic.ca/english/support