Panasonic HC-X2000 HC-X1500 Advanced Operating Manual - Page 75
[video Out/lcd/vf] Menu, Output Settings], Alarm], Video Out Sel], Sdi Out]
View all Panasonic HC-X2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Chapter 4 Operation - Menu settings [OUTPUT SETTINGS] [AUDIO OUT] Sets the audio channel and the format to output from the headphone terminal, and the built-in speaker. [CH1] Outputs the signal for audio channel 1 as monaural. [CH2] Outputs the signal for audio channel 2 as monaural. [CH1/2 STEREO] Outputs the signals of the audio channel 1 and the audio channel 2 as stereo. Outputs as monaural from the built-in speaker. [CH1/2 MIX] Mixes the signals of the audio channel 1 and the audio channel 2 and outputs as monaural. (Factory setting: [CH1/2 STEREO]) [ALARM] Sets whether to have an alarm sound. The alarm is output from the speaker of this unit or the headphones. It is not output to external output destinations. [BATTERY END] Sets whether to sound the alarm when the remaining battery level is exhausted. The items that can be set are as follows. ≥ [HIGH], [LOW], [OFF] (Factory setting: [OFF]) [MEDIA END] Sets whether to sound the alarm when the remaining recording capacity of the memory card is exhausted. The items that can be set are as follows. ≥ [HIGH], [LOW], [OFF] (Factory setting: [OFF]) [WARNING] Sets whether to sound the alarm when a system error or warning occurs. The items that can be set are as follows. ≥ [HIGH], [LOW], [OFF] (Factory setting: [OFF]) [VIDEO OUT/LCD/VF] menu Configures the settings for the external output, the information to display in the LCD monitor or viewfinder and the output format. X2000 [VIDEO OUT SEL] Switches the output destination for images and audio. [SDI] [HDMI] (Factory setting: [HDMI]) Outputs from the terminal. Outputs from the terminal. X2000 [SDI OUT] ¥ Set the [VIDEO OUT/LCD/VF] menu → [VIDEO OUT SEL] to [SDI]. [OUT FORMAT] Selects the signal to output from the terminal. The items that can be selected differ depending on the [SYSTEM] menu → [FREQUENCY]/ [FILE FORMAT]/[REC FORMAT] setting. [1920×1080p] Outputs in 1920×1080p. [1920×1080i] Outputs in 1920×1080i. [1920×1080PsF] [1280×720p] Outputs in 1920×1080PsF. Outputs in 1280×720p. (Factory setting: [1920×1080i]) @ NOTE 0 For the combinations that can be set, refer to "Format that can be output from the terminal [X2000]". ( l 157) [SDI AUDIO GAIN CHG] Adjusts the gain for the audio signal output from the terminal. The items that can be set are as follows. ≥ [0dB], [j6dB], [j8dB] (Factory setting: [j8dB]) - 75 -