Panasonic HC-X2000 HC-X1500 Advanced Operating Manual - Page 132
Interval recording, Ending background recording
View all Panasonic HC-X2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Chapter 5 Shooting - Special recording function Ending background recording 1 Press and hold the USER button to which [BACKGR PAUSE] is assigned for approximately 5 seconds or touch and hold the USER button icon for approximately 5 seconds and release. The background recording stops on card slot 2. The background recording on card slot 2 can also be stopped by pressing and holding the button for approximately 5 seconds. @ NOTE 0 The background recording on card slot 2 cannot end while recording is performed on card slot 1. End the background recording while recording is stopped on card slot 1. 0 The background recording on card slot 2 ends in the following cases. j When the power is turned off j When the remaining recording capacity of the memory card has run out j When an error has occurred when writing to the memory card Interval recording The unit will record 1 frame at each set time interval. It is possible to record a short clip of a long slow-moving scene, such as a sunset, by recording with intervals between frames. A 1 frame recording B (Time) C Time set in [INTERVAL TIME] 1 Select the [SYSTEM] menu → [FILE FORMAT] → [MOV]. 2 Select the [RECORDING] menu → [REC FUNCTION] → [REC MODE] → [INTERVAL]. [INTRVL] is displayed in the special recording function display of the camera image screen. 3 Set the time in the [RECORDING] menu → [REC FUNCTION] → [INTERVAL TIME]. 4 Press the REC button. ≥ [I-REC] is displayed in red in the special recording function display of the camera image screen. ≥ The unit will repeat the operation of one frame recording at set time interval. ≥ To stop recording, press the REC button. ≥ Set [NORMAL] in the [RECORDING] menu → [REC FUNCTION] → [REC MODE] to clear the setting. @ NOTE 0 In the following cases, [REC MODE] is fixed to [NORMAL]. j When [SYSTEM] menu → [FILE FORMAT] is set to [MP4] or [AVCHD] j When [SYSTEM] menu → [SUPER SLOW] is set to [ON] 0 The setting is cleared when the power is turned off. 0 Audio is not recorded. 0 Recorded data (data recorded until recording was stopped) is included in 1 clip. 0 The [RECORDING] menu → [TC/UB] → [FREE/REC RUN] is fixed to [REC RUN]. 0 The [RECORDING] menu → [TC/UB] → [DF/NDF] is fixed to [NDF]. 0 (For the X1500 ) The [VIDEO OUT/LCD/VF] menu → [HDMI OUT] → [HDMI REC REMOTE] does not work. 0 (For the X2000 ) The [VIDEO OUT/LCD/VF] menu → [SDI OUT] → [SDI REC REMOTE] and the [VIDEO OUT/LCD/VF] menu → [HDMI OUT] → [HDMI REC REMOTE] do not work. 0 When [REC MODE] is set to [INTERVAL], the [DEL LAST CLIP] assigned to the USER button does not work. 0 If the length of the clip is less than 3 seconds when the recording is stopped, the image of the final frame will be recorded to make the length of the clip to 3 seconds. 0 Depending on the light source and the scene being recorded, color hue and focus may not be automatically set. In case such as this, try adjusting manually. (l 111, 114) 0 When recording for long periods, it is recommended to connect to the AC adaptor for recording. 0 The recording is stopped once when the length of the clip exceeds 10 hours in the interval recording. The recording is automatically resumed after few seconds. 0 For information about recording functions that cannot be used simultaneously, refer to page 192. - 132 -