Panasonic HC-X2000 HC-X1500 Advanced Operating Manual - Page 40
Preventing unintentional erasing, Status of the card access lamp and memory card
![]() |
View all Panasonic HC-X2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Chapter 3 Preparation - Preparing the memory card Preventing unintentional erasing Writing, erasing and formatting data is prohibited by setting the write-protection switch A of the memory card to the LOCK side. Status of the card access lamp and memory card Card access lamp Orange (illuminated) Green (illuminated) Orange (flashing) Orange (rapidly flashing) Green (slowly flashing) Recording target Recording possible Accessing card Recognizing memory card Error No remaining recording capacity Write-protected Recording not possible Off No memory card inserted Illegal format Card not supported During card reader mode Memory card status Both loading/writing are permitted. Current recording target. Both loading/writing are permitted. Loading/writing are currently being performed. The memory card is being recognized. An error has occurred. This will flash even if the memory card is not inserted when an error has occurred. No recording capacity left on the memory card. Only loading is possible. The write-protection switch of the memory card is set to the LOCK side. It cannot record with the recording format that is currently set. Change the recording format or use a memory card compatible with the recording format to record. A memory card has not been inserted. It is not the correct format. Reformat the card. This is a card that cannot be used with the unit, such as MMC (Multi Media Card). The card 1 access lamp/card 2 access lamp turns off when not accessing. - 40 -
![](/manual_guide/products/panasonic-hcx1500-hcx1500-advanced-operating-manual-40ef178/40.png)