Panasonic HC-X2000 HC-X1500 Advanced Operating Manual - Page 194
Cleaning and storing, Cleaning the main unit, Cautions for storage
View all Panasonic HC-X2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Cleaning and storing Chapter 10 Notes - Cleaning and storing Cleaning the main unit ≥ Remove the battery or disconnect the AC cable from the power outlet before cleaning. ≥ Do not use benzine or thinner to clean the unit. Using benzine or thinner may cause deformation or peeling off of the paint of the main unit. ≥ Wipe the main unit with a soft and clean cloth. For heavy dirt, wipe with a cloth soaked in kitchen detergent diluted with water, and then with a dry cloth. ≥ When using a chemical dust cloth, follow the instructions that came with the cloth. Cautions for storage Remove the battery from the main unit when storing. Store them in a place where humidity is low and temperature is relatively constant. When storing the unit, it is recommended that you place a desiccant (silica gel) in with it. ≥ Recommended temperature: 15 °C to 25 °C (59 oF to 77 oF) ≥ Recommended relative humidity: 40% to 60% ∫ Main unit ≥ Wrap in a soft cloth to prevent dust from getting inside. ∫ Battery ≥ The battery life shortens where the temperature is extremely high or low. ≥ Storing in a place where there is heavy oil smoke or dust may lead to malfunctions due to rust on terminal connectors, etc. ≥ Do not let the battery terminal contact a metal object (such as a necklace or hairpin). Short circuit may occur between terminals and it may lead to heat generation. Touching on a heated part may cause severe burns. ≥ Store the battery with electrically discharged. For long-term storage, it is recommended to charge the battery at least once a year and use it up completely on the unit before storing it again. ≥ Remove dust and other debris that gather on the contacts of the battery. ∫ Memory card ≥ Do not allow dirt, water, or other foreign objects to get into the contacts on the back of the card. ≥ If you remove it from the unit, be sure to put it in its case. ≥ Do not place SD cards in the following areas: j Where corrosive gases, etc., may be generated j In places exposed to direct sunlight, or places with high temperatures such as near heating devices j Where there is excessive moisture or dust j Locations susceptible to significant difference in temperature (condensation can occur.) j Where static electricity or electromagnetic waves occur - 194 -