Panasonic HC-X2000 HC-X1500 Advanced Operating Manual - Page 88
Wlan Ipv4 Setting], Information], Ip Address]
View all Panasonic HC-X2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Chapter 4 Operation - Menu settings [CHANNEL] Sets the channel to be used when connected to the wireless LAN with following items set. ≥ The [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT] The items that can be set are as follows. ≥ [AUTO], [CH1], [CH6], [CH11] (Factory setting: [AUTO]) [ENCRYPTION] Sets the encryption method when the [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [INFRA(SELECT)]/[INFRA(MANUAL)] is selected. The items that can be set are as follows. ≥ [WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE] (Factory setting: [WPA2-AES]) @ NOTE 0 The setting is fixed to [WPA2-AES] when the [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT] is set. [ENCRYPT KEY] Sets the encryption key. Set the key using a string of 8 to 63 characters or a hexadecimal number with 64 digits. (Factory setting: [01234567890123456789abcdef]) [WLAN IPv4 SETTING] [DHCP] Sets whether to use the automatic acquisition through DHCP or to use the DHCP server function of the unit. [OFF] [CLIENT] [SERVER] Does not use DHCP. Performs automatic acquisition through DHCP if connecting by setting [WLAN PROPERTY] → [TYPE] → [INFRA(SELECT)]/ [INFRA(MANUAL)]. Enables the DHCP server function of the unit when connecting by setting [WLAN PROPERTY] → [TYPE] → [DIRECT]. (Factory setting: [OFF]) [IP ADDRESS] Sets the IP address. (Factory setting: [192.168.0.1]) @ NOTE 0 Cannot be set when [WLAN IPv4 SETTING] → [DHCP] → [CLIENT] is selected. [SUBNET MASK] Sets the subnet mask. (Factory setting: [255.255.255.0]) @ NOTE 0 Cannot be set when [WLAN IPv4 SETTING] → [DHCP] → [CLIENT] is selected. [DEFAULT GATEWAY] Sets the default gateway. (Factory setting: [192.168.0.254]) @ NOTE 0 If you do not use default gateway, set to [0.0.0.0]. 0 Cannot be set when [WLAN IPv4 SETTING] → [DHCP] → [CLIENT] is selected. 0 Disables the setting for the default gateway when [WLAN PROPERTY] → [TYPE] → [DIRECT] is selected. [PRIMARY DNS] Sets the primary DNS server. (Factory setting: [0.0.0.0]) @ NOTE 0 Disables the setting for the primary DNS server when [WLAN PROPERTY] → [TYPE] → [DIRECT] is selected. [SECONDARY DNS] Sets the secondary DNS server. (Factory setting: [0.0.0.0]) @ NOTE 0 Disables the setting for the secondary DNS server when [WLAN PROPERTY] → [TYPE] → [DIRECT] is selected. [INFORMATION] [STATUS] Displays the status of the network function. - 88 -