Panasonic KXP1121E Operating Instructions - Page 25

Using the Software Using the Software Control Panel Software Program This software is used to change the configuration of the printer. Using this software, you can also print out the printer's character table. It is necessary to install the printer driver to use this software. When using the Windows driver, these settings are rarely used. When using the Windows driver, make sure Emulation is set to "EPSON". The printer is compatible with most popular software packages. If no changes are required, you should be ready to print. In most cases there will be no need to change the initial setup items. To start the Control Panel Software program, from [Start], select [All programs] ® [Panasonic] ® [Panasonic KX-P1121E] ® [Control Panel Software]. You can change the following items: Emulation EPSON (Epson LQ-850) IBM (IBM Proprinter X24E) Character set Italic (Epson only) Graphic 1 Graphic 2 Code page USA (PC-437) Multilingual (PC-850) Portugal (PC-860) Canada-French (PC-863) Norway (PC-865) Turkey (PC-857) International character USA, France, Germany, UK, Denmark1, Sweden, Italy, Spain1, Japan, Norway, Denmark2, Spain2, Latin America, Korea, Legal Font Draft, Courier, Prestige, Bold PS Pitch 10 CPI, 12 CPI, 15 CPI, 17 CPI, 20 CPI, P.S Zero font Normal (0) Slashed (0) Page length 11 Inch, 12 Inch, 14 Inch, 11 2/3 Inch, 8 Inch, 8 1/2 Inch, 5 1/2 Inch Auto LF On (CR+LF) Off (CR only) Auto CR (IBM only) On (LF, VT, ESC+"J" +CR) Off (LF, VT, ESC+"J" only) Skip perforation On (1 inch skip) Off (No skip) A.G.M (Alternate Graphic Mode) (IBM only) On, Off Graphic direction Uni Direction, Bi Direction Download buffer Enable, Disable Auto load On (Available) Off (Not available) Auto Online On (Available) Off (Not available) TOF set (# / 72 inch) Tractor: 0-360 Friction: 0-360 Note • The following items can also be set through the Control Panel (Page 27): Emulation, Page length, Auto LF, Graphic direction and Download buffer Operating Instructions 25