Panasonic PV GS300 Digital Video Camera - English/ Spanish - Page 25

Before using ª Operating with remote control The menu screen transition is the same as when the buttons on the main unit are used. 1 Press the [MENU] button. 2 Select a menu item. ≥Use the direction buttons (3, 2, 1, 4) and [ENTER] button in place of the joystick on the main unit. 4 Press the [MENU] button or the joystick to complete the settings. ≥When the LCD monitor is rotated by 180° towards the lens, the brightness of the LCD monitor cannot be adjusted. ≥To adjust the brightness of the viewfinder, close the LCD monitor and extend the viewfinder to activate it. ≥These settings will not affect the images actually recorded. ª In order to increase the brightness of the entire LCD monitor 1 Press the [POWER LCD] button. 3 Press the [MENU] button to exit the menu screen. Adjusting LCD monitor/viewfinder ª Adjusting the brightness and color level 1 Set [SETUP] >> [LCD SET] or [EVF SET] >> [YES]. POWER LCD ≥The [ ] indication appears on the LCD monitor. ≥If the [POWER LCD] button is pressed, the entire LCD monitor will become approx. twice as bright as the normal. ≥When the [POWER LCD] button is pressed again, the [ ] indication disappears and the original brightness is restored. ≥This will not affect the images to be recorded. ≥If you turn on the Camcorder when the AC adaptor is used, the [POWER LCD] function will automatically be activated. ≥You cannot use this function in PC Connection Mode. 2 Move the joystick up or down in order to select the item to be adjusted. [LCD SET] : Brightness of the LCD monitor : Color level of the LCD monitor [EVF SET] EVF :Brightness of the viewfinder 3 Move the joystick left or right to move the bar indication representing the brightness. 25 LSQT0974