Panasonic PV GS300 Digital Video Camera - English/ Spanish - Page 68

Others PUSH THE RESET SWITCH: An irregularity in the equipment has been detected. Press the [RESET] button (-13-). This may solve the problem. CHANGE MODE TO USE USB: The USB cable is connected to the Camcorder in Card Recording Mode. DISCONNECT USB CABLE: You are attempting to turn the mode dial in PC Connection Mode with the USB cable connected to the Camcorder. You are attempting to record pictures on a tape/card with the USB cable connected to the Camcorder. NO INK IN PRINTER: There is no ink. Check the connected printer. NO PAPER IN PRINTER: There is no paper. Check the connected printer. PRINTER ERROR: Check the connected printer. PC DOES NOT SUPPORT USB2.0: The Camcorder is connected to a personal computer that does not support USB 2.0. (Refer to the operating instructions for PC connection.) CAN NOT USE USB: You are connecting the USB cable with the DV cable connected. CHANGE TO MANUAL MODE: You are attempting to select the item on the [SCENE MODE] when the [AUTO/ MANUAL/FOCUS] switch is set to [AUTO]. CAN NOT OPERATE (MOTION DV MODE): You are attempting to change [D.ZOOM] setting during MotionDV Mode. REVERSE THE LCD MONITOR: At the time of 0 Lux MagicPix mode, when LCD monitor is not reversed, it displays. When the LCD monitor is rotated by 180° towards the lens, the brightness of the LCD monitor cannot be adjusted. Functions cannot be used simultaneously Some functions in the Camcorder are disabled or cannot be selected due to its specifications. The table below shows examples of functions restricted by conditions. Functions ≥Digital zoom ≥Fade ≥Backlight compensation ≥Help mode ≥Recording check ≥Blank search ≥Soft skin ≥Tele macro ≥MagicPix ≥RapidFire Consecutive Photoshot ≥Flash ≥Zoom microphone ≥Wind noise reduction ≥Scene mode ≥Change of white balance ≥Adjusting the shutter speed, iris/gain Conditions which disable the functions ≥When the Card Recording mode is used ≥When the MagicPix function is used ≥When the iris/gain is set ≥While recording to a tape ≥While recording to a tape ≥When the Card Recording mode is used ≥When [PICTURE SIZE] is set to other than 0.2 or 0.3M ≥While recording to a tape ≥During demo mode ≥When RapidFire Consecutive Photoshot is used ≥When the MagicPix function is used ≥An external microphone is used ≥When setting the [AUTO/ MANUAL/FOCUS] switch to [AUTO] ≥When the MagicPix function is used ≥When digital zoom (10k or higher) is used ≥When the MagicPix function is used ≥When the MagicPix function is used ≥When the scene mode is used 68 LSQT0974