Panasonic SCPT1050 SCPT1050 User Guide - Page 11

Simple Setup Preparing the remote control / Performing QUICK SETUP ∫ [PT1050] Before using your wireless subwoofer Perform the pairing procedure below to use your wireless subwoofer. Preparation ≥Ensure all connections are completed. ≥Turn on the main unit and reduce the volume. 1 Turn on your wireless subwoofer. 2 While pressing [5/9] on the main unit, press the numbered button [3] on the remote control until "P" lights in the main unit's display. 3 While "P" is displayed, press [I/D SET]. I/D SET Use a pointed object. Wireless subwoofer I/D SET 4 While pressing [5/9] on the main unit, press the numbered button [3] on the remote control. ≥" [WS] " lights on the main unit's display. 5 Turn the wireless subwoofer off and on again. ≥Make sure its indicator lights up green. 7 step Preparing the remote control ∫ Batteries Insert so the poles (i and j) match those in the remote control. Press in and lift up. R6/LR6, AA Replace the cover. ≥ Do not use rechargeable type batteries. Do not: ≥ mix old and new batteries. ≥ use different types at the same time. ≥ heat or expose to flame. ≥ take apart or short circuit. ≥ attempt to recharge alkaline or manganese batteries. ≥ use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can severely damage the remote control. Remove the batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place. ∫ Use Aim at the remote control signal sensor (➜ page 13), avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit. 8 step Performing QUICK SETUP The QUICK SETUP screen assists you to make necessary settings. To display the picture from the main unit, 1 turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.). ≥To change your television's video input mode, refer to its operating instructions. 2 DVD ≥This remote control can perform some basic television operations (➜ page 12). 3 SETUP DVD Turn on the unit. Select "DVD/CD". Show the QUICK SETUP screen. Setup QUICK SETUP Select the menu language. English AUTO SETUP , , , ENTER RETURN to select and press ENTER RETURN to return 4 Select Follow the messages RETURN and make the settings. ≥Menu Language ≥TV Type ≥TV Aspect Register 5 Press to finish QUICK ENTER SETUP. 6 SETUP Press to exit. RQTX0064 To change these settings later Select "QUICK SETUP" in the "Others" menu (➜ page 27). 11