Panasonic SCPT1050 SCPT1050 User Guide - Page 2

IMPORTANT SAFETY INSTRUCTIONS Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. ≥ These operating instructions are applicable to models SC-PT950, SC-PT953 and SC-PT1050 for a variety of regions. ≥ Unless otherwise indicated, illustrations in these operating instructions are of SC-PT950 for U.S.A. and Canada. ≥ Operations in these instructions are described mainly with the remote control, but you can perform the operations on the main unit if the controls are the same. CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, ≥DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. ≥USE ONLY THE RECOMMENDED ACCESSORIES. ≥DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE FOLLOWING APPLIES ONLY IN THE U.S.A. AND CANADA (For wireless system) The following mark and symbols are located on bottom of the unit. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. [PT950] : indicates features applicable to SC-PT950 only. [PT953] : SC-PT953 only [PT1050] : SC-PT1050 only System Main unit Front speakers Center speaker Surround speakers Subwoofer Active subwoofer Digital transmitter Wireless system SC-PT950 SA-PT950 SB-HF950 SB-HC950 SB-HS950 SB-HW950 s SH-FX65T SE-FX65 SC-PT953 SA-PT953 SB-HF950 SB-HC950 SB-HS950 SB-HW950 s SH-FX65T SE-FX65 SC-PT1050 SA-PT1050 SB-HF1050 SB-HC950 SB-HS1050 s SB-WA1050 SH-FX65T SE-FX66 THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ≥ Reorient or relocate the receiving antenna. ≥ Increase the separation between the equipment and receiver. ≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ≥ Consult the dealer or an experienced radio/TV technician for help. FCC caution: To maintain compliance with FCC regulations, shielded interface cables must be used with this equipment. Operation with non-approved equipment or unshielded cables may result in interference to radio and TV reception. Any changes or modifications not approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094 Support Contact: Panasonic Consumer Electronics Company Telephone No.: 1-800-211-7262 WARNING: To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter. IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 10) Protect the power cord from being walked on or pinched particularly 2) Keep these instructions. at plugs, convenience receptacles, and the point where they exit from 3) Heed all warnings. the apparatus. 4) Follow all instructions. 11) Only use attachments/accessories specified by the manufacturer. 5) Do not use this apparatus near water. 12) Use only with the cart, stand, tripod, bracket, or table 6) Clean only with dry cloth. specified by the manufacturer, or sold with the 7) Do not block any ventilation openings. Install in accordance with the apparatus. When a cart is used, use caution when manufacturer's instructions. moving the cart/apparatus combination to avoid injury 8) Do not install near any heat sources such as radiators, heat registers, from tip-over. stoves, or other apparatus (including amplifiers) that produce heat. 13) Unplug this apparatus during lightning storms or when 9) \U.S.A.\and\Canada] unused for long periods of time. RQTX0064 Do not defeat the safety purpose of the polarized or grounding-type 14) Refer all servicing to qualified service personnel. Servicing is plug. A polarized plug has two blades with one wider than the other. required when the apparatus has been damaged in any way, such as A grounding-type plug has two blades and a third grounding prong. power-supply cord or plug is damaged, liquid has been spilled or The wide blade or the third prong are provided for your safety. If the objects have fallen into the apparatus, the apparatus has been 2 provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. exposed to rain or moisture, does not operate normally, or has been dropped.