Panasonic SCPT1050 SCPT1050 User Guide - Page 38

Troubleshooting guide HDMI or progressive video There is ghosting when HDMI or ≥ This problem is caused by the editing method or material used on DVD-Video, but should be progressive output is on. corrected if you use interlaced output. - When using the COMPONENT VIDEO OUT terminal, set "Video Output Mode" in Picture Menu to 23 "480i". (Alternatively, press and hold [CANCEL] to switch to "480i".) - When using the HDMI AV OUT terminal, set "Video Output Mode" in Picture Menu to "480i" output 23, marked with an "¢". Or, disable the HDMI AV OUT connection and use other video connections. 26 Make the settings in the following order: 1 Set "Video Mode" in the "HDMI" menu to "Off". 2 Set "Video Output Mode" in Picture Menu to "480i". (Alternatively, press and hold [CANCEL] to switch to "480i".) Pictures not in progressive ≥ Select "480p" in "Video Output Mode" in Picture Menu. 23 output. ≥ The unit's VIDEO OUT terminal outputs the interlaced signal even if "PRG" is displayed. 7 Closed captions not displayed. ≥ When HDMI or progressive output is on, closed captions will not be displayed. - Radio Distorted sound or noise is heard. ≥ Adjust the position of the FM or AM antenna. - "ST" flickers or does not light. ≥ Use an outdoor antenna. 9 A beat sound is heard. ≥ Turn the television off or move it away from the unit. - A low hum is heard during AM ≥ Separate the antenna from other cables. - broadcasts. Wireless equipment No sound. The indicator on the wireless equipment keeps flashing between red and green. ≥ Ensure that the digital transmitter is fully inserted into the slot of the main unit. ≥ Ensure that the wireless equipment is plugged into the AC outlet and is turned on. Then, check that " [W1] " [and " [WS] " ([PT1050])] is displayed on the main unit's display. ≥ There is a power supply problem. Consult the dealer. 9 10, 13 - Television displays "/" "Cannot display group xx, content xx" "This disc may not be played in your region" No on-screen display. Main unit's screen saver remains ≥ The operation is prohibited by the unit or disc. ≥ You are trying to display incompatible contents. ≥ Only DVD-Video discs that include or have the same region number as the one on the rear panel of this unit can be played. ≥ Select "On" in "On-Screen Messages" in the "Display" menu. ≥ When using the HDMI connection, audio/video information is continually transferred between the main unit and the television regardless of which source has been selected on the main unit. This is normal. - - Cover page 26 - Troubleshooting guide RQTX0064 38