Panasonic SCPT1050 SCPT1050 User Guide - Page 28

Using the EZ SyncTM "HDAVI ControlTM" SKIP SLOW/SEARCH  PLAY ONE TOUCH PLAY TV Television speakers are active. ≥ The volume of the home theater system is set to "0". - This function works only when "DVD/CD" or "AUX"§ [or "D-IN"§ ([PT1050])] is selected as the source on the home theater system. ≥ Audio output is 2-channel audio. Using the EZ SyncTM "HDAVI ControlTM" EZ Sync "HDAVI Control" EZ Sync "HDAVI Control" is a convenient function that offers linked operations of this unit, and a Panasonic television (VIERA) under "HDAVI Control". You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for connected equipment for operational details. This unit supports "HDAVI Control 2" function. The TV with "HDAVI Control 2" function enables the following operation: EZ Sync Control only with TV's remote control (for "HDAVI Control 2") (➜ right) Preparation ≥ Confirm that the HDMI connection (➜ page 7) has been made. ≥ Set "EZ Sync" to "On" (➜ page 26, "HDMI" menu). ≥ To complete and activate the connection correctly, turn on all EZ Sync "HDAVI Control" compatible equipment and set the television to the corresponding HDMI input mode for the home theater system. Whenever the connection or settings are changed, reconfirm the points above. One touch play You can turn on the home theater system and television, and start playing the disc in the play position with a single press of a button. Press [ONE TOUCH PLAY]. Theater speakers will be automatically activated (➜ below). ≥ This function also works if you press [1 PLAY] on the home theater remote control during home theater standby mode. When switching between the theater and television speakers, the TV screen may be blank for several seconds. § To toggle which input source the main unit will automatically switch to, press [SETUP] while the main unit is in "AUX" or "D-IN" mode. - The default setting is "AUX". Power off link When the television is turned off, the home theater system goes into standby mode automatically. ≥ This function works only when "DVD/CD" or "AUX"§ [or "D-IN"§ ([PT1050])] is selected as the source on the home theater system. ≥ When the television is turned on, the home theater system does not turn on automatically. (Power on link is not available.) § For "AUX" or "D-IN" mode, power off link can be set to work with one or the other. To toggle the mode that this function works with, press [SETUP] while the main unit is in "AUX" or "D-IN" mode. - The default setting is "AUX". [Note] Only the home theater system turns off when you press [Í] for shutting it down. Other connected equipment compatible with EZ Sync "HDAVI Control" stays on. EZ Sync Control only with TV's remote control (for "HDAVI Control 2") [Note] Playback may not be immediately displayed on the television. If you miss the beginning portion of playback, press [:] or [6] to go back to where playback started. Auto input switching ≥ When you switch the television input to: - TV tuner mode, the home theater system will automatically switch to "AUX"§ [or "D-IN"§ ([PT1050])]. - HDMI input mode for the home theater system, the home theater system will automatically switch to "DVD/CD" if it is in "AUX"§ [or "D-IN"§ ([PT1050])] mode. ≥ When you start disc play, the television will automatically switch to the HDMI input mode for the home theater system. § To toggle the mode that this function works with, press [SETUP] while the main unit is in "AUX" or "D-IN" mode. - The default setting is "AUX". Speaker control You can select whether audio is output from the home theater system or the television speakers by using the television menu settings. For details, refer to the operating instructions of your television. You can control the disc menus of the home theater system with the TV's remote control when using the "DVD/CD" source. When operating the TV's remote control, refer to the below illustration for operation buttons. 1 Select the theater operation menu by using the television menu settings. (For details, refer to the operating ENTER/ PLAY instructions of your television.) ≥The home theater system will automatically RETURN switch to "DVD/CD" if it is in "AUX"§ [or "D-IN"§ ([PT1050])] mode. § To toggle the mode that this function works with, press [SETUP] while the main unit is in "AUX" or "D-IN" mode. -The default setting is "AUX". 2 Select the desired item. ≥"TOP MENU": Shows a disc top menu (➜ page 17, 20) or program list (➜ page 21). ≥"MENU": Shows a disc menu (➜ page 17, 20) or play list (➜ page 21). ≥"Control Panel": The basic operations for discs are available. EZ Sync TOP MENU MENU Control Panel PAUSE PLAY SKIP SKIP RETURN STOP Home theater Theater speakers are active. ≥ When the home theater system is in standby mode, changing the television speakers to theater speakers in the television menu will automatically turn the home theater system on and select "AUX"§ [or "D-IN"§ ([PT1050])] as the source. ≥ The television speakers are automatically muted. ≥ You can control the volume setting using the volume or mute button on the TV's remote control. (The volume level is displayed on the main RQTX0064 unit's FL display.) ≥ To cancel muting, you can also use the home theater remote control (➜ page 12). ≥ If you turn off the home theater system, television speakers will be 28 automatically activated. [Note] ≥ Depending on the menu, some button operations cannot be performed from the TV's remote control. ≥ "Control Panel" can be selected directly by using a button on the TV's remote control (e.g. [SUB MENU]).