Panasonic SV-AV30 Sd Multi Media Termi - Page 53

About the Lens, About the AC Adaptor, Optimal Use of the Battery - power cord

Page 53 highlights

After use, be sure to take the Memory Card out and detach the Battery from the SD Multi AV Device or pull out the AC Main Lead from AC Main socket. If the Battery is used in an extremely cold environment, the Battery may only operate for approx. 5 minutes. If the Battery becomes extremely hot, a protective function may operate, and the Battery may become unusable for a while. ª About the Lens ≥Do not touch the lens. Wipe the SD Multi AV Device with a soft dry cloth when the lens becomes unclean. ≥When the Lens is Fogged Up, turn off the SD Multi AV Device and leave the SD Multi AV Device in this condition for approx. 1 hour. When the lens temperature becomes close to the ambient temperature, the fog disappears naturally. ≥Be careful not to touch the lens when picking up the SD Multi AV Device from the supplied Wearable carry case. ≥Remove the battery if the device is left unused for a long time. ≥The temperature of the SD Multi AV Device and the battery may rise while charging the battery. Such rise of temperature does not indicate a fault. ≥Do not install, remove, plug or unplug the battery or power cord while the power is on. ª About the LCD Monitor ≥In a place with drastic temperature changes, condensation may form on the LCD Monitor. Wipe it with a soft dry cloth. ≥If your SD Multi AV Device is extremely cold when you turn its power on, the image on the LCD Monitor will be slightly darker than usual at first. However, as the internal temperature increases, it goes back to the normal brightness. Extremely high precision technology is employed to produce the LCD Monitor screen featuring a total of approximately 200,000 pixels. The result is more than 99.99% effective pixels with a mere 0.01% of the pixels inactive or always lit. However, this is not a malfunction and does not affect the recorded picture. ª About the AC Adaptor ≥If the Battery is warm, charging takes longer than usual. ≥If you use the AC Adaptor near a radio, radio reception may be disturbed. Keep the AC Adaptor 1 meter or more away from a radio. ≥After use, be sure to pull out the AC Main Lead from the AC Main socket. ≥Keep the electrodes of the AC Adaptor and Battery clean at all times. ª Optimal Use of the Battery Battery Characteristics This Battery is a rechargeable lithium ion battery. Its ability to generate power is based upon the chemical reaction that takes place inside it. This reaction is susceptible to the surrounding temperature and humidity, and, if the temperature is too high or too low, the operating time of the Battery becomes shorter. 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

53
After use, be sure to take the Memory
Card out and detach the Battery from the
SD Multi AV Device or pull out the AC
Main Lead from AC Main socket.
If the Battery is used in an extremely
cold environment, the Battery may only
operate for approx. 5 minutes. If the
Battery becomes extremely hot, a
protective function may operate, and the
Battery may become unusable for a
while.
ª
About the Lens
Do not touch the lens. Wipe the SD Multi
AV Device with a soft dry cloth when the
lens becomes unclean.
When the Lens is Fogged Up, turn off the
SD Multi AV Device and leave the SD
Multi AV Device in this condition for
approx. 1 hour. When the lens
temperature becomes close to the
ambient temperature, the fog disappears
naturally.
Be careful not to touch the lens when
picking up the SD Multi AV Device from
the supplied Wearable carry case.
ª
About the AC Adaptor
If the Battery is warm, charging takes
longer than usual.
If you use the AC Adaptor near a radio,
radio reception may be disturbed. Keep
the AC Adaptor 1 meter or more away
from a radio.
After use, be sure to pull out the AC Main
Lead from the AC Main socket.
Keep the electrodes of the AC Adaptor
and Battery clean at all times.
Remove the battery if the device is left
unused for a long time.
The temperature of the SD Multi AV
Device and the battery may rise while
charging the battery. Such rise of
temperature does not indicate a fault.
Do not install, remove, plug or unplug the
battery or power cord while the power is
on.
ª
About the LCD Monitor
In a place with drastic temperature
changes, condensation may form on the
LCD Monitor. Wipe it with a soft dry cloth.
If your SD Multi AV Device is extremely
cold when you turn its power on, the
image on the LCD Monitor will be slightly
darker than usual at first. However, as the
internal temperature increases, it goes
back to the normal brightness.
ª
Optimal Use of the Battery
Battery Characteristics
This Battery is a rechargeable lithium ion
battery. Its ability to generate power is
based upon the chemical reaction that takes
place inside it. This reaction is susceptible
to the surrounding temperature and
humidity, and, if the temperature is too high
or too low, the operating time of the Battery
becomes shorter.
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
200,000 pixels. The result is more than
99.99% effective pixels with a mere
0.01% of the pixels inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.