Panasonic UF 8200 Facsimile - Page 25
Installing Your Machine
UPC - 000037529468
View all Panasonic UF 8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
ENGLISH Installing Your Machine Optional Telephone Handset Jack or External Telephone Jack Connect the Telephone Line Cable from the Optional Handset Kit into the HANDSET jack on the back of the machine. or You can connect an additional standard single line telephone to the machine. To connect a telephone, remove the protective tab on the TEL jack. RJ-11C Telephone Jack Optional 2nd Telephone Line Jack (Optional G3 Communication Port Kit (UE-407029) is required.) Telephone Line Jack Plug one end of the Telephone Line Cable into the telephone jack supplied by the telephone company and the other end into the LINE jack on the back of the machine. Handset Kit (Optional) (UE-403185) POWER (Some models may have the Power Switch.) Power Cord (Included) (Service use only) LAN Cable (10BASE-T/100BASE-TX Cable) Insert the plug until a click is heard. (LAN cable is not included with the product.) Purchase a Category 5 Cable, compliant with EIA/TIA 568-A-5 standard. USB Port See Operating Instructions (For Document Management System) RX Lamp (orange) Blinks when there is data traffic on the LAN. 10BASE-T/100BASE-TX Ethernet Hub LAN Connection Jack (10BASE-T/100BASE-TX) Ethernet LAN (10BASE-T/100BASE-TX Cable not included) 1 LINK Lamp (green) Illuminates when connected to the LAN. Lamp will not turn ON if LAN cable is defective (contains breaks). NOTE 1. Please observe the standards for USB cables.There is a danger that circuit board could be damage by voltage difference. It is recommended that identical cable taps be used to supply power. 25