Pentax 16561 Operation Manual - Page 111

Taking Pictures 3 To use the flash, press the b button. The flash pops up. (p.114) 4 Take the picture. • In a mode, EV compensation is unavailable. • [AUTO] cannot be selected for sensitivity. • Flash modes , (Auto), b (Flash On), c (Auto + Red-eye) and d (Flash On + Red-eye) are not available. • A warning appears if there is a large difference between the current 3 exposure and the proper exposure. If the difference is greater than ±2.0EV, only the exposure warning icon is displayed. If the difference is ±2.0EV or less, the exposure warning icon is displayed and the difference between the current exposure and the proper exposure is shown in increments of 1/3EV. • The shutter speed and aperture value set in a mode are shared with b and c modes. Changing the values in one mode automatically changes the values in the other modes. • When the shutter speed is set to a speed slower than 1/4 seconds, a process to reduce image roughness and unevenness (noise reduction) is performed. • When the shutter speed or aperture value is changed, the new value is displayed in a larger font size (height of 1.5×). • Even when the zoom ratio is changed, the aperture value is maintained. However, when the current aperture value cannot be used with the selected zoom ratio, the closest aperture value is set. In this case, if you change the zoom ratio again and the original aperture value can be used, the setting returns to the original aperture value. Downloaded From camera-usermanual.com Pentax Manuals 109