Pentax 16561 Operation Manual - Page 146

Saving the Settings (Memory) The Memory function is for saving the current camera settings when the camera is turned off. For some camera settings, the Memory function is always set to O (On) (the settings are saved when the camera is turned off), while for others you can choose O or P (Off) (to choose whether the settings are saved or not when the camera is turned off). The items which can be set to O or P in the Memory function are shown in the table below. (Items not 3 listed here are always saved in the selected settings when the camera is turned off.) If you select O, the settings will be saved in the status they were in immediately before the camera was turned off. If you select P, the settings will be reset to the defaults when the camera is turned off. The table below also shows whether the Memory default setting for each item is O or P. Taking Pictures Item Description Default Settings Page Face Detection The Face Detection mode set by using the I button P p.70 Flash Mode The flash mode set with the four-way controller (4) O p.112 Drive Mode The drive mode set with the four-way controller (2) P p.92p.97 Focus Mode The focus mode set with the four-way controller (5) Zoom Position The zoom position set with the zoom lever P p.114 P p.74 MF Position White Balance Sensitivity EV Compensation AE Metering Digital Zoom The manual focus position set with the four-way controller (23) The [White Balance] setting on the [A Rec. Mode] menu The [Sensitivity] setting on the [A Rec. Mode] menu The [EV Compensation] setting on the [A Rec. Mode] menu The [AE Metering] setting on the [A Rec. Mode] menu The [Digital Zoom] setting on the [A Rec. Mode] menu P p.115 P p.124 P p.126 P p.76 P p.128 O p.76 1D44ownloaded From camera-usermanual.com Pentax Manuals