Pentax 16561 Operation Manual - Page 129

6 Press the 3 button. The camera returns to capture status. • When the sensitivity is set to 3200 or 6400, the number of recorded pixels is fixed at f (2592×1944). • When D (4000×2672), E(4000×2256) or F(2992×2992) is selected, you cannot select 3200 or 6400. • When set to c (Digital SR), 9 (Green) or C (Movie) mode and A (Burst Shooting(L)), B (Burst Shooting(M)) or C (Burst Shooting(H)) is selected as the drive mode, only [AUTO] is available. • When set to S (Fireworks) mode, the sensitivity is fixed to the minimum value. 3 • In a (Manual Exposure) mode, you cannot select [AUTO]. • When [Highlight Correction] in [D-Range Setting] is set to O (On), 160 is displayed as the sensitivity instead of 80 or 100. Saving the Sensitivity setting 1p.144 Taking Pictures Setting the ISO Correction in AUTO Set the sensitivity range when the sensitivity is set to AUTO. You can select from 80-100, 80-200, 80-400, 80-800, and 80-1600. 1 Press the 3 button in A mode. The [A Rec. Mode] menu appears. 2 Use the four-way controller (23) to select [ISO Corction in AUTO]. 3 Press the four-way controller (5). A pull-down menu appears. 4 Use the four-way controller (23) Rec. Mode 1/4 to select the sensitivity Image Tone Bright adjustment range. Recorded Pixels ISO80-100 Quality Level ISO80-200 White Balance ISO80-400 Sensitivity ISO80-800 ISO Corction in AUTO ISO80-1600 MENU Cancel OK OK Downloaded From camera-usermanual.com Pentax Manuals 127