Pentax 16561 Operation Manual - Page 227

Setting the USB Connection Mode Set the device to which the camera is connected with the USB cable. Make sure to set the USB Connection mode before connecting your camera to the computer. You cannot perform the following setting if the camera is connected to your computer with the USB cable. 1 Turn your camera on. 2 Press the 3 button in Q mode. The [W Setting] menu appears. When you press the 3 button in A mode, press the four-way controller (5) once. 3 Use the four-way controller (23) to select [USB Connection]. 4 Press the four-way controller (5). A pull-down menu appears. 5 Use the four-way controller (23) Setting 2/4 to select [MSC]. USB Connection MSC Video Out PTP HDMI Out Auto Eye-Fi Brightness Level Power Saving 5 sec. 6 Press the 4 button. MENU Cancel OK OK 8 The setting is saved. Viewing Images on a Computer Downloaded From camera-usermanual.com Pentax Manuals 225