Pfaff ambition Owner's Manual - Page 11

Preparations - 1 5 sewing machine

Get Pfaff ambition PDF manuals and user guides View all Pfaff ambition manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Preparations Unpacking 1. Place the box on a steady, flat surface. Lift the machine out of the box, remove the outer packaging and lift off the machine carrying case. 2. Remove all outer packing material and the plastic bag. Preparations Connect to the power supply Among the accessories you will find the power cord and the foot control. Note: Consult a qualified electrician if in doubt as how to connect the machine to the power source. Unplug the power cord when the machine is not in use. C For this sewing machine, foot control model C-9002 manufactured by CHIENHUNG TAIWAN., LTD B must be used. 1. Connect the foot control cord to the front socket on the bottom right side of the machine (A). A 2. Connect the power cord to the rear socket on the bottom right side of the machine (B). Plug the cord into the wall socket. 3. Press the ON/OFF switch to ON to turn on power and light (C). Pack away after sewing 1. Switch the main switch off. 2. Unplug the cord from the wall socket and then from the machine. 3. Unplug the foot control cord from the machine. Wind the cord around the foot control for easy storage. 4. Place all accessories in the accessory tray. Slide the tray on to the machine around the free arm. 5. Place the foot control in the space above the free arm. 6. Put on the hard cover. For the USA and Canada This sewing machine has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way. 2:1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
2:1
Preparations
Preparations
Unpacking
1.
Place the box on a steady,
fl
at surface. Lift
the machine out of the box, remove the outer
packaging and lift off the machine carrying
case.
2.
Remove all outer packing material and the
plastic bag.
Connect to the power supply
Among the accessories you will
fi
nd the power
cord and the
foot control.
Note: Consult a quali
fi
ed electrician if in doubt as how
to connect the machine to the power source. Unplug the
power cord when the machine is not in use.
For this sewing machine, foot control model C-9002
manufactured by CHIENHUNG TAIWAN., LTD
must be used.
1.
Connect the foot control cord to the front
socket on the bottom right side of the machine
(A).
2.
Connect the power cord to the rear socket on
the bottom right side of the machine (B). Plug
the cord into the wall socket.
3.
Press the
ON/OFF switch to ON to turn on
power and light (C).
Pack away after sewing
1.
Switch the
main switch off.
2.
Unplug the cord from the wall socket and then
from the machine.
3.
Unplug the foot control cord from the machine.
Wind the cord around the foot control for easy
storage.
4.
Place all accessories in the accessory tray. Slide
the tray on to the machine around the free arm.
5.
Place the foot control in the space above the
free arm.
6.
Put on the hard cover.
For the USA and Canada
This sewing machine has a polarized plug (one
blade wider than the other). To reduce the risk
of electric shock, this plug is intended to
fi
t in a
polarized outlet only one way. If the plug does
not
fi
t fully in the outlet, reverse the plug. If it
still does not
fi
t, contact a quali
fi
ed electrician to
install the proper outlet. Do not modify the plug
in any way.
A
B
C