Pfaff ambition Owner's Manual - Page 24
Settings
View all Pfaff ambition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Preparations Settings In the settings menu, you can adjust the machine settings and screen settings. All settings are stored even when the machine is turned off. ambition™ 1.5 Settings menu (1.5) Touch the settings menu tab (A) to open. The settings menu is divided into two tabs. Select a tab (1 or 2) by touching it. Twin needle Touch the twin needle icon to activate. Touch "-" and "+" to set the twin needle width. The selected width is shown in the twin needle icon. When a twin needle size is selected, the width of all stitches is limited for that needle size to prevent needle breakage. A warning pop-up will be shown if you select a stitch that is too wide for the set twin needle size. When activated, the twin needle icon will be shown in sewing mode. The setting is kept until you deactivate it. Note: Twin needle and stitch width safety cannot be used at the same time. A warning sound will be heard when trying to activate both settings. Stitch width safety Select this function when using a straight stitch needle plate or a straight stitch presser foot to lock the center needle position for all stitches to prevent damage to the needle, presser foot or stitch plate. Touch the stitch width safety icon to activate. When activated, the stitch width safety icon will be shown in sewing mode. The setting is kept until you deactivate it. Note: When turning on the machine with this setting activated and for every stitch selection that is not a straight stitch, a pop-up informs you that the machine is set for straight stitch. Twin needle and stitch width safety cannot be used at the same time. A warning sound will be heard when trying to activate both settings. A Touch screen calibration When touching the icons on the screen, the screen might need a calibration to adjust to your touch. Touch the calibration icon to open a special view for touch screen calibration. Use the stylus to first touch the center of the cross in the top left corner, then touch the center of the cross in the bottom right corner. The calibration view closes automatically when you have touched the second cross. Language Touch "-" and "+" to change the language of all text in your machine. Software version Check the software version for your sewing machine. Contrast Touch "-" and "+" to adjust the contrast of the touch screen. The setting is stored even when the machine is turned off. 2:14